Gestra NRA1-3
BRAND : Gestra
Technical data
Supply voltage 230 V, 50 / 60 Hz 115 V, 50 / 60 Hz optional Fuse external, 200 mA, slow-blow Power consumption max. 4 W Inputs 16 inputs for measuring electrodes NRG 16-19, NRG 16-27, NRG 16-28 1 input for temperature sensor, e. g. TRG 5-53, measuring insert PT 100 max. length of connecting cables 100 m Output 1 volt-free relay contact, 4 A 250 V AC / 30 V DC cos ? = 1 (IEC 61810) Contact material AgNi 0,15 Inductive loads must be provided with interference suppressors (RC combinations) as specified by the manufacturer. Electrode voltage 12 V Setting for banking-up of condensate Difference between condensate and plant temperatures dts 1 K to 100 K, adjustable in steps of 1 K (mode 1 and 6) Difference between condensate temperature and switchpoint “Banking-up of condensate” dtC 1 K to 100 K, adjustable in steps of 1 K (mode 2 and 7) Switchpoint “Banking-up of condensate” 0 °C to 255 °C, adjustable in steps of 5 K (mode 2 and 7) Indicators and ajustors 1 three-digit seven-segment LED display, red, for indicating faulty steam traps and status and error messages 3 LEDs for indicating banking-up of condensate, steam loss and malfunction in measuring electrode 3 operating buttons 1 ten-pole code switch for system configuration, node ID and baud rate setting Design NRA 1-3a for wall mounting NRA 1-3e for panel mounting Housing material: ABS Protection NRA 1-3a: IP 65 to EN 60529 NRA 1-3e: Front: IP 65 to EN 6...
Details
Technical data
Supply voltage
230 V, 50 / 60 Hz
115 V, 50 / 60 Hz optional
Fuse
external, 200 mA, slow-blow
Power consumption
max. 4 W
Inputs
16 inputs for measuring electrodes
NRG 16-19, NRG 16-27, NRG 16-28
1 input for temperature sensor, e. g. TRG 5-53,
measuring insert PT 100
max. length of connecting cables 100 m
Output
1 volt-free relay contact, 4 A 250 V AC /
30 V DC cos ? = 1 (IEC 61810)
Contact material AgNi 0,15
Inductive loads must be provided with interference
suppressors (RC combinations) as specified by the
manufacturer.
Electrode voltage
12 V
Setting for banking-up of condensate
Difference between condensate and plant temperatures
dts 1 K to 100 K, adjustable in steps of 1 K (mode 1 and 6)
Difference between condensate temperature
and switchpoint “Banking-up of condensate”
dtC 1 K to 100 K,
adjustable in steps of 1 K (mode 2 and 7)
Switchpoint “Banking-up of condensate” 0 °C to 255 °C,
adjustable in steps of 5 K (mode 2 and 7)
Indicators and ajustors
1 three-digit seven-segment LED display, red,
for indicating faulty steam traps and status and error
messages
3 LEDs for indicating banking-up of condensate,
steam loss and malfunction in measuring electrode
3 operating buttons
1 ten-pole code switch for system configuration,
node ID and baud rate setting
Design
NRA 1-3a for wall mounting
NRA 1-3e for panel mounting
Housing material: ABS
Protection
NRA 1-3a: IP 65 to EN 60529
NRA 1-3e: Front: IP 65 to EN 60529, back: IP 00
Protection class
NRA 1-3a: 2 (completely insulated)
Weight
approx. 2 kg
Cable gland / Electrical connection
Cable gland with integral cable clamp,
8 x M 16 x 1.5 mm
18 five-pole screw-type terminals,
conductor size 1.5 mm2
1 three-pole screw-type terminal,
conductor size 1.5 mm2
Ambient temperature
when system is switched on: 0°...55 °C
during operation: –10°... 55 °C
