What are you looking for?

Varec FMR60 Radar Tank Gauge

BRAND : Varec

The FMR60 Radar Tank Gauge (RTG) is a smart, 80 GHz radar tank gauge for continuous and non-contact level measurement with an accuracy rate of ±1 mm.

The FMR60 Radar Tank Gauge (RTG) is a smart, 80 GHz radar tank gauge for continuous and non-contact level measurement with an accuracy rate of ±1 mm.

Specifications

Accuracy

Measuring distance up to 0.8 m (2.62 ft): max. ±4 mm (±0.16 in) – digital, ±0.03% analog
Measuring distance > 0.8 m (2.62 ft): ±1 mm (±0.04 in), digital, ±0.02% analog
Non-repeatability – ? 1 mm (0.04 in)

Power Consumption
  • 2-wire; 4-20mA HART: < 0.9 W
  • 2-wire; 4-20mA HART, switch output:< 0.9 W
  • 2-wire; 4-20mA HART, 4-20mA: < 2 x 0.7 W

Current Consumption

HART:
Nominal current: 3.6 to 22mA. The start-up current for multidrop mode can be parametrized
(is set to 3.6mA on delivery)

Breakdown signal (NAMUR NE43): adjustable: 3.59 to 22.5mA

Temperature

+24 °C (+75 °F) ±5° F (±9° C)

Pressure

960 mbar abs. (14 psia) ±100 mbar (±1.45 psi)

Weight

3.2 – 3.9 kg (7.11 – 8.61 lb) plus flange weight

Enclosure

Degree of protection:

  • With closed housing tested according to:
    • IP68, NEMA6P (24 h at 1.83 m under water surface)
    • For plastic housing with transparent cover (display module): IP68 (24h at 1.00 m under
      water surface)
    • IP66, NEMA4X
  • With open housing: IP20, NEMA1
  • Display module: IP22, NEMA2
  • Housing GT19: plastic
  • Housing GT20: aluminium, seawater repellent, powder coated

Antenna

IP 68 (NEMA 6P)

Ambient Temperature

Unit: -40 °F and +176 °F (-40 °C and +80 °C)
Display: -4 °F and +158 °F (-20 °C and +70 °C)

Operating Frequency

Approx. 80 GHz, up to 8 devices can be installed in the same tank

Approvals

FM, ATEX, IEC Ex, or NEPSI


Options

Approvals and Certifications

FM, CSA, ATEX, IECEx, NEPSi, KC, INMETRO, JPN, and TIIS

Antenna
  • Drip-off, PTFE 50mm/2? antenna

Seal

FKM Viton GLT (-40…80° C/-40…176° F or – 40…130° C/-40…266° F) and EPDM (-40…130° C/-40…266° F)

Process Connections
  • Threaded ISO0228 G1-1/2?, 316L
  • Thread ANSI MNPT1-1/2?, 316L
  • PP or 316L – UNI flange 3?/DN80/80, max 4bar abs/58psia, suitable for NPS 3? Cl.150/DN80 PN16/10K 80
  • PP or 316L – UNI flange 4?/DN100/100, max 4bar abs/58psia, suitable for NPS 4? Cl.150/DN100 PN16/10K 100
  • PP or 316L – UNI flange 6?/DN150/150, max 4bar abs/58psia, suitable for NPS 6? Cl.150/DN150 PN16/10K 150

Output Options

HART

Gland Entry

Metric, NPT, G

Languages

Over 15 national languages available




Other Suggested Products

Products