Scanning head | AK ECA 4410 | AK ECA 4410 | AK ECA 4490 F | AK ECA 4490 M | AK ECA 4490 P |
Interface | EnDat 2.2 | Fanuc Serial Interface; ?i Interface | Mitsubishi high speed interface | Panasonic Serial Interface |
Ordering designation | EnDat22 | Fanuc05 | Mit03-4 | Pana01 |
Clock frequency | ? 16 MHz | – |
Calculation time tcal | ? 5 µs | – |
Functional safety For applications up to | - SIL 2 according to EN 61 508
(further basis for testing: EN 61 800-5-2) - Category 3, PL 'd” as per EN ISO 13 849-1:2015
| – |
PFH | ? 20 · 10–9
(up to 6000 m above sea level) | – |
Electrical connection | Cable, 1 m or 3 m with 8-pin M12 coupling (male) or 15-pin D-sub connector |
Cable length1) | ? 100 m | ? 50 m | ? 30 m | ? 50 m |
Voltage supply | DC 3.6 V to 14 V |
Power consumption (max.) | At 3.6 V: 700 mW At 14 V: 800 mW | At 3.6 V: 850 mW At 14 V: 950 mW |
Current consumption (typical) | At 5 V: 90 mA
(without load) | At 5 V: 100 mA
(without load) |
Vibration 55 to 2000 Hz Shock 6 ms | ? 200 m/s2 (EN 60 068-2-6) ? 200 m/s2 (EN 60 068-2-27) | ? 500 m/s² (EN 60 068-2-6) ? 1000 m/s² (EN 60 068-2-27) |
Operating temperature | –10 °C to 70 °C2) | –10 °C to 70 °C |
Protection EN 60 5293) | IP67 |
Mass Scanning head Connecting cable Coupling (M12) | 18 g (without cable) 20 g/m 15 g |
| 1) With HEIDENHAIN cable; clock frequency ? 8 MHz 2) With drum outside diameter of 104.63 mm: 10 °C to 70 °C 3) In the application the device must be protected from contamination by solids and liquids. If necessary, use a suitable enclosure with seal and sealing air |
