Woerner 463.298 Control Unit
BRAND : Woerner
Control Unit 463.298
for Three Spraying Devices Type SBD-B
at Maximum
Technical Data:
Use:
The control unit serves to control a spraying
lubrication system comprising three spraying
devices at maximum.
Power consumption: 4 W
Supply voltage: 24VDC
-
Voltage at inputs: 24 VDC
Input resistance of inputs: 6,8 kR
Temperature range: -5...50°C
Protection type: IP 20
250V at
30 VDC; 5A
Data protection: 10 years
15% to +20%
(Incl. residual ripple)
Response time of inputs: 10 msec
Outputs contact data: AC max.
After control voltage switch-on, the unit is
ready for operation.
Upon making of contact "I1” (system ON),
pre-lubrication is carried out. At the same
time, the lubrication system's auto-matic
mode of operation is activated. In
conjunction with automatic operation, a
cycle time lapses. After reaching the preset
cycle time, lubrication is carried out. Cycle
time is set to 0 and starts to lapse again.
With every opening of the "system ON”
contact, the cycle time is set to 0.
When contact "I4” (hand ON) is made,
lubrication can be initiated.
Details
Control Unit 463.298
for Three Spraying Devices Type SBD-B
at Maximum
Technical Data:
Use:
The control unit serves to control a spraying
lubrication system comprising three spraying
devices at maximum.
Power consumption: 4 W
Supply voltage: 24VDC
-
Voltage at inputs: 24 VDC
Input resistance of inputs: 6,8 kR
Temperature range: -5...50°C
Protection type: IP 20
250V at
30 VDC; 5A
Data protection: 10 years
15% to +20%
(Incl. residual ripple)
Response time of inputs: 10 msec
Outputs contact data: AC max.
After control voltage switch-on, the unit is
ready for operation.
Upon making of contact "I1” (system ON),
pre-lubrication is carried out. At the same
time, the lubrication system's auto-matic
mode of operation is activated. In
conjunction with automatic operation, a
cycle time lapses. After reaching the preset
cycle time, lubrication is carried out. Cycle
time is set to 0 and starts to lapse again.
With every opening of the "system ON”
contact, the cycle time is set to 0.
When contact "I4” (hand ON) is made,
lubrication can be initiated.
