BRAND : Woerner
Technical Data - General:
Technical Data - Reed Contacts:
For the detection of liquides levels in
reservoirs.
In the lower end of the conductor pipe
there are two Reed contacts having a
difference distance of 25mm for prewarning and disconnection. The switching
function is bistable.
The switching functions are shown via
LEDs being integrated into the receptacle.
LED green = voltage supply
LED yellow = pre-warning
switching point L2
LED red = minimum level
switching point L1
Operating pressure max: 10 bar
Temperature range: 0...90 °C
Mounting position: vertical ± 20 °
Material:
Internal pipe D 18: CU-alloy
External pipe D 60: Al-alloy
Flange: Al-alloy
Float: 1.4571
Sealing: Abil
Protection type: IP 65
Protection class: II (protection insulated)
Plug-in connection: M12x1, 4pol.
Flange: Drill pattern at DIN 24557 part 2
Weight at L1 = 300: 0,45 kg
Switching voltage: 18...30 VDC
Switching current max.: 1A
Switching power max.: 40/60 W/VA
For inductive an capacitive loads, suppressor circuits shall be provided for.
(Diode, RC element, varistor)
Technical Data - General:
Technical Data - Reed Contacts:
For the detection of liquides levels in
reservoirs.
In the lower end of the conductor pipe
there are two Reed contacts having a
difference distance of 25mm for prewarning and disconnection. The switching
function is bistable.
The switching functions are shown via
LEDs being integrated into the receptacle.
LED green = voltage supply
LED yellow = pre-warning
switching point L2
LED red = minimum level
switching point L1
Operating pressure max: 10 bar
Temperature range: 0...90 °C
Mounting position: vertical ± 20 °
Material:
Internal pipe D 18: CU-alloy
External pipe D 60: Al-alloy
Flange: Al-alloy
Float: 1.4571
Sealing: Abil
Protection type: IP 65
Protection class: II (protection insulated)
Plug-in connection: M12x1, 4pol.
Flange: Drill pattern at DIN 24557 part 2
Weight at L1 = 300: 0,45 kg
Switching voltage: 18...30 VDC
Switching current max.: 1A
Switching power max.: 40/60 W/VA
For inductive an capacitive loads, suppressor circuits shall be provided for.
(Diode, RC element, varistor)