d |
Details
Technical specification DIMENSIONS d | | 80 mm |
---|
D | | 110 mm |
---|
B | | 16 mm |
---|
d1 | | 90.7 mm |
---|
d2 | | 89.2 mm |
---|
D2 | | 102.2 mm |
---|
r1,2 | | min. 1 mm |
---|
r3,4 | | min. 0.6 mm |
---|
a | | 24.9 mm |
---|
ABUTMENT DIMENSIONS da | | min. 84.6 mm |
---|
db | | min. 84.6 mm |
---|
Da | | max. 105 mm |
---|
Db | | max. 106.8 mm |
---|
ra | | max. 1 mm |
---|
rb | | max. 0.6 mm |
---|
dn | | 91.7 mm |
---|
CALCULATION DATA Basic dynamic load rating | C | 15.6 kN |
---|
Basic static load rating | C0 | 15 kN |
---|
Fatigue load limit | Pu | 0.465 kN |
---|
Attainable speed for grease lubrication | | 19000 r/min |
---|
Attainable speed for oil-air lubrication | | 30000 r/min |
---|
Contact angle | ? | 15 ° |
---|
Ball diameter | Dw | 6.747 mm |
---|
Number of balls | z | 34 |
---|
Reference grease quantity | Gref | 5.29 cm³ |
---|
PRELOAD AND STIFFNESS (BACK-TO-BACK, FACE-TO-FACE)Preload class A | GA | 52 N |
---|
Static axial stiffness, preload class A | | 55 N/µm |
---|
Preload class B | GB | 105 N |
---|
Static axial stiffness, preload class B | | 72 N/µm |
---|
Preload class C | GC | 310 N |
---|
Static axial stiffness, preload class C | | 115 N/µm |
---|
CALCULATION FACTORSCalculation factor | f | 1.13 |
---|
Calculation factor | f1 | 1 |
---|
Calculation factor | f2A | 1 |
---|
Calculation factor | f2B | 1.03 |
---|
Calculation factor | f2C | 1.08 |
---|
Calculation factor | fHC | 1.01 |
---|
Calculation factor | f0 | 9.9 |
---|
Other Suggested Products
Products
|
---|