Details
Effortless withdrawal force generation
The SKF advanced hydraulic spindles TMHS 75 and TMHS 100 generate a high pulling force with very little effort compared to the standard mechanical spindles. They dramatically reduce the time needed to dismount a bearing or other component. The spindles are equipped with integrated hydraulic pumps for force generation. Maximum pulling forces are limited by special safety valves and the hydraulic oil will remain inside the pump.
- Integrated hydraulic cylinder, pump and spindle - no separate pump is required
- Safety valve helps prevent overloading the spindle and the puller in case excessive force is applied
- Spring-loaded centre point in the nosepiece allows easy centring of the puller on the shaft without damaging shaft centre point
- Hand lever with ergonomic grip can be rotated 360°
- Hardened and chrome plated piston with spring return function
- Extension pieces included allows easy adaptation for the required pulling length
Technical data Designation
| TMHS 75
| TMHS 100
|
| Contents | 1 × hydraulic spindle
| 1 × hydraulic spindle
|
2 × extension pieces; 50 and 100 mm (2.0 and 3.9 in.)
| 3 × extension pieces; 50, 100 and 150 mm (2.0, 3.9 and 5.9 in.)
|
1 × nosepiece
| 1 × nosepiece
|
Maximum withdrawal force
| 75 kN (8,4 ton US)
| 100 kN (11.2 ton US)
|
Piston stroke
| 75 mm (3.0 in.)
| 80 mm (3.1 in.)
|
Body thread
| UN 11/4 × 12
| UN 11/2 × 16
|
Nose piece diameter
| 35 mm (1.4 in.)
| 30 mm (1.2 in.)
|
Maximum reach
| 229 mm (9.0 in.)
| 390 mm (15.4 in.)
|
Weight
| 2,7 kg (6.0 lb)
| 4,5 kg (10.0 lb) |
| Designation | Desciption | Suitable for |
| TMHS 5T | Set containing extension pieces 50 and 100 mm and the nosepiece | TMHS 75 |
| TMHS 8T | Set containing extension pieces 50, 100 and 150 mm and the nosepiece | TMHS 100 |
TMHS 100-1
| Advanced hydraulic spindle, 100 kN, spindle only | TMHS 100 |
