d |
Details
Technical specification DIMENSIONS d | | 40 mm |
---|
D | | 62 mm |
---|
B | | 12 mm |
---|
d1 | | 46.5 mm |
---|
d2 | | 44.8 mm |
---|
D1 | | 54.15 mm |
---|
r1,2 | | min. 0.6 mm |
---|
r3,4 | | min. 0.3 mm |
---|
a | | 13.2 mm |
---|
ABUTMENT DIMENSIONS da | | min. 43.2 mm |
---|
db | | min. 42 mm |
---|
Da | | max. 58.8 mm |
---|
Db | | max. 60 mm |
---|
ra | | max. 0.6 mm |
---|
rb | | max. 0.3 mm |
---|
dn | | 48 mm |
---|
CALCULATION DATA Basic dynamic load rating | C | 9.75 kN |
---|
Basic static load rating | C0 | 6.1 kN |
---|
Fatigue load limit | Pu | 0.26 kN |
---|
Attainable speed for grease lubrication | | 38000 r/min |
---|
Attainable speed for oil-air lubrication | | 58000 r/min |
---|
Contact angle | ? | 15 ° |
---|
Ball diameter | Dw | 6.35 mm |
---|
Number of balls | z | 19 |
---|
Reference grease quantity | Gref | 1.4 cm³ |
---|
PRELOAD AND STIFFNESS (BACK-TO-BACK, FACE-TO-FACE)Preload class A | GA | 52 N |
---|
Static axial stiffness, preload class A | | 35 N/µm |
---|
Preload class B | GB | 157 N |
---|
Static axial stiffness, preload class B | | 55 N/µm |
---|
Preload class C | GC | 315 N |
---|
Static axial stiffness, preload class C | | 74 N/µm |
---|
CALCULATION FACTORSCalculation factor | f | 1.05 |
---|
Calculation factor | f1 | 1 |
---|
Calculation factor | f2A | 1 |
---|
Calculation factor | f2B | 1.05 |
---|
Calculation factor | f2C | 1.09 |
---|
Calculation factor | fHC | 1.01 |
---|
Calculation factor | f0 | 8.3 |
---|
Other Suggested Products
Products
|
---|