General- Dual board assembly
- PCX-JAM is a CompactPCI® (PICMG® CPCI 2.0) system slot board
- SXP-JAM is a CompactPCI® Serial (PICMG® CPCI-S.0) peripheral card
- Form factor single size Eurocard (board dimensions 100x160mm2)
- Mounting height 3U
- Common front panel width 8HP for the assembly of both cards
- High speed mezzanine connectors between both cards
|
PCX-JAM- CompactPCI® Classic system slot board (replaces CompactPCI® CPU card)
- Must reside rightmost on a CompactPCI® backplane which has its system slot right aligned
- CompactPCI® backplane communication via J1 and J2 hard metric connectors, 32-bit support
- PCI Express® to PCI® bridge PI7C9X112, 3.3V or 5V VIO
- Support for up to 7 CompactPCI® peripheral cards
- On-board PCI Express® switch PI7C9X2G606PR
- +5V only board design for low cost CompactPCI® system power supply
- PCX-JAM can deliver +3.3V to CompactPCI® peripheral boards
- Added value front panel I/O connectors (3 x USB3, 3 x GbE)
- On-board 3 x I210-IT Gigabit Ethernet networking controllers
- On-board USB 3.0 quad port controller TUSB7340
|
SXP-JAM- CompactPCI® Serial peripheral card, backplane communication via P1 connector
- Must reside leftmost on a CompactPCI® Serial backplane with its system slot right aligned
- PCI Express® x1 or x4 enabled peripheral card slot required (Gen2 or Gen3 recommended)
- PCIe® x1 Gen2 sufficient for operation w. PCX-JAM
- PCIe® x4 Gen3 path provided for future projects
- On-board PCIe® redrivers for optimum signal integrity
- Option on-board M.2 SATA SSD socket (SATA enabled peripheral card slot required)
- Option CompactPCI® Serial backplane connector P6 populated for even more mechanical ruggedness
|
Front Panel I/O- 3 x Gigabit Ethernet RJ45 (3 x I210-IT)
- 3 x USB 3.0 Type-A (TUSB7340)
|
Networking- Three networking interface controllers (NIC), PCIe® based
- 1000BASE-T, 100BASE-TX, 10BASE-T connections
- Intel® I210-IT -40°C to +85°C operating temperature GbE controllers w. integrated PHY
- IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
- IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streams
- IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
- Three GbE ports via RJ45 front panel jacks
|
USB- TI quad port USB controller, PCIe® based
- USB 3.1 Gen1 (formerly USB 3.0) 5Gbps SuperSpeed
- Three front panel Type-A connectors
|
PCI Express®- PCIe® Gen2 packet switch PI7C9X2G606PR (6-port, 6-lane) located on PCX-JAM
- Upstream port x1 to CompactPCI® Serial backplane via SXP-JAM P1 connector
- 2 x Gigabit Ethernet controllers Intel® I210IT (front panel)
- 3 x downstream ports x1 to Gigabit Ethernet controllers Intel® I210IT (front panel)
- Downstream port x1 to USB controller TUSB7340
- Downstream port x1 to PCI® bridge PI7C9X112 (7 x PCI 33/66MHz CompactPCI® peripheral slots)
- PCIe® Gen3 redrivers on SXP-JAM
|
SSD- M.2 SATA socket (B-key), suitable for an SATA based SSD module
- Any size 2230 - 22110
- Located on the SXP-JAM
- SATA via CompactPCI® Serial backplane (SXP-JAM P1 connector)
|
Environmental & Regulatory- Designed & manufactured in Germany
- ISO 9001 certified quality management
- Long term availability
- Rugged solution
- Coating, sealing, underfilling on request
- Lifetime application support
- RoHS compliant
- Operating temperature: -40°C to +85°C (industrial temperature range)
- Storage temperature: -40°C to +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 88.8 years (SXP-JAM), 34.7 years (PCX-JAM)
- EC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
|
Applications- Legacy hardware integration into modern CompactPCI® Serial systems
- Enables special PCI® functions w/o an equivalent PCIe® solution
- Replacement solution for obsolete CompactPCI® Classic CPU cards
- Modern CompactPCI® Serial CPU card controls both backplane segments
- Useful front I/O in addition to basic backplane bridge function
|
