Home
EKF
EKF SC4-CONCERTO CompactPCI Serial CPU Card Intel Mobile Workstation Processor Xeon E3 v5 Family 6th Generation Intel Core Processor

EKF SC4-CONCERTO CompactPCI Serial CPU Card Intel Mobile Workstation Processor Xeon E3 v5 Family 6th Generation Intel Core Processor

BRAND : EKF

General

CompactPCI® Serial (PICMG® CPCI-S.0) CPU card
Form factor single size Eurocard (board dimensions 100x160mm²)
Mounting height 3U
Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
Backplane communication via PCI Express® Gen3, SATA 6G, USB 3.0, Gigabit Ethernet
Local mezzanine expansion option, COTS and custom specific boards

Processor

Intel® Skylake-H mobile platform with ECC (CM238 mobile workstation PCH)
Intel® Xeon® processor E3 v5 family (mobile workstation)
- Xeon E3 1505M v5 • 2.8/3.7GHz • 8M • 4C/8T • DDR4 2133 ECC • 45/35W • GT2 • vPRO™
- Xeon E3 1505L v5 • 2.0/2.8GHz • 8M • 4C/8T • DDR4 2133 ECC • 25W • GT2 • vPRO™

6th Generation Intel® Core™ mobile processor

i3 6100E • 2.7GHz • 3M • 2C/4T • DDR4 2133 ECC • 35W • GT2

i3 6102E • 1.9GHz • 3M • 2C/4T • DDR4 2133 ECC • 2...

Request A Quote

Description

Description

Details

General

CompactPCI® Serial (PICMG® CPCI-S.0) CPU card
Form factor single size Eurocard (board dimensions 100x160mm²)
Mounting height 3U
Front panel width 4HP (8HP/12HP assembly with optional mezzanine side card)
Front panel I/O connectors for typical system configuration (2 x USB3, 2 x DisplayPort, 2 x GbE)
Backplane communication via PCI Express® Gen3, SATA 6G, USB 3.0, Gigabit Ethernet
Local mezzanine expansion option, COTS and custom specific boards

Processor

Intel® Skylake-H mobile platform with ECC (CM238 mobile workstation PCH)
Intel® Xeon® processor E3 v5 family (mobile workstation)
- Xeon E3 1505M v5 • 2.8/3.7GHz • 8M • 4C/8T • DDR4 2133 ECC • 45/35W • GT2 • vPRO™
- Xeon E3 1505L v5 • 2.0/2.8GHz • 8M • 4C/8T • DDR4 2133 ECC • 25W • GT2 • vPRO™
6th Generation Intel® Core™ mobile processor
- i3 6100E • 2.7GHz • 3M • 2C/4T • DDR4 2133 ECC • 35W • GT2
- i3 6102E • 1.9GHz • 3M • 2C/4T • DDR4 2133 ECC • 25W • GT2
- G3900E • tbd GHz • 2M • 2C/2T • DDR4 2133 ECC • 35W • GT1
- G3902E • tbd GHz • 2M • 2C/2T • DDR4 2133 ECC • 25W • GT1

Firmware

Phoenix® UEFI (Unified Extensible Firmware Interface) with CSM*
Fully customizable by EKF
Secure Boot and Measured Boot supported - meeting all demands as specified by Microsoft®
Windows®, Linux and other (RT)OS' supported
Intel® AMT supported for Intel® Xeon® E3 v5 (disabled by default, must be enabled via BIOS setup)

* CSM (Compatibility Support Module) emulates a legacy BIOS environment, which allows to boot a legacy operating system such as DOS, 32-bit Windows and some RTOS'

Main Memory

Integrated memory controller up to 32GB DDR4 2133 ECC +ECC
DDR4 +ECC soldered memory up to 16GB
DDR4 +ECC SO-DIMM memory module socket up to 16GB

Performance Rating

Graphics

Integrated HD Graphics Engine, 3 symmetric independent displays
3D HW acceleration DirectX12, OpenCL 2.x, OpenGL 4.3/4.4, ES 2.0
HW video decode/encode HEVC, VP9, JPEG
Content protection
Front panel options: Dual DisplayPort (DP) connectors
3rd DisplayPort optional via Type-C connector on low profile mezzanine card
Max resolution 4096 x 2304 @60Hz (any DisplayPort, concurrent operation)
DisplayPort™ 1.2 Multi-Stream Transport (MST) - display daisy chaining
MST max resolution via single DP connector 2880x1800@60Hz (2 displays), 2304x1440@60Hz (3 displays)
Integrated audio (3 independent audio streams)

Networking

Up to 10 networking interfaces in total - 2 x front RJ45 GbE, option 8 x backplane or 4 x M12-X front
1000BASE-T, 100BASE-TX, 10BASE-T connections
Front port 1 - I219LM with Intel® AMT support
Front port 2 - Intel® I210-IT -40°C to +85°C operating temperature GbE NIC w. integrated PHY
IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensivitive streams
IEEE 1588 and 802.1AS packets hardware-based time stamping for high-precision time synchronization
Backplane Gigabit Ethernet option w. S80-P6 mezzanine module - I210-IT NIC & Marvell Peridot switch
Option front panel M12 X-coded GbE ports with SCL-RHYTHM side card (8HP front panel width)

Chipset

Intel® CM238 Mobile Workstation Platform Controller Hub (PCH)
- PCIe Gen3 8GT/s
- SATA 6G
- USB3
- GbE
- LPC, Audio, Legacy

On-Board Building Blocks

Additional on-board devices, PCIe® based
1 x Gigabit Ethernet controller Intel® I210IT
1 x Gigabit Ethernet PHY Intel® I219LM
IEEE 1588-2008 Precision Time Protocol supported including PPS and PPM signals
SATA 6G RAID controller Marvell® 88SE9230 ARM powered subsystem for host CPU offload

Security

Trusted Platform Module
TPM 2.0 for highest level of certified platform protection
Infineon Optiga™ SLB 9665 cryptographic processor
Conforming to TCG 2.0 specification
AES hardware acceleration support (Intel® AES-NI)

Front Panel I/O (4HP)

2 x Gigabit Ethernet RJ45 (1 = PCH & I219LM - Intel® AMT, 2 = I210IT)
2 x DisplayPort (from processor integrated HD graphics engine, standard latching DP receptacles
2 x USB 3.0
Option 2 x Type-C USB 3.1 Gen1 (requires low profile mezzanine expansion card w. front panel I/O)
Support for Type-C locking plugs (dual screw) according to the 'Locking Connector Spec. Rev. 1.0'
Option DisplayPort Alt Mode on lower Type-C connector (3rd video monitor output)

CompactPCI® Serial Backplane Resources

PICMG® CPCI-S.0 CPU card & system slot controller
16 x PCIe Gen3 8GT/s (2 links x 8 for two fat pipe slots, derived directly from the Intel® Xeon® or Core™ CPU
6 x PCIe Gen3 8GT/s (6 links x 1 for peripheral slots)
2 x SATA 6G (from CM238 PCH)
4 x SATA 6G (Marvell hardware RAID controller)
5 x USB2, 3 x USB3 (from CM238 PCH)
Option 8 x Gigabit Ethernet (Marvell 88E6390 GbE switch, requires low profile mezzanine expansion card)

Local Expansion

Mezzanine side card connectors for local expansion
Low profile mezzanine modules available (4HP front panel) and also side cards (8HP F/P assembly)
P-EXP - Legacy (from PCH)
P-HSE1 - configurable as 4 x SATA 6G or 4 x PCIe (from CM238 PCH), 1 x USB3
P-HSE2 - 4 x PCIe (from CM238 PCH) & 3rd DisplayPort (from CPU)

4HP Low profile mezzanine module preferred options:
C47-MSATA Mezzanine module - 2 x mSATA SSD sockets
C48-M2 Mezzanine module - 2 x M.2 2280 SATA SSD sockets
S20-NVME Mezzanine module - 1 x M.2 2280 NVMe SSD socket, 1 x Type-C USB F/P connector
S40-NVME Mezzanine module - 1 x M.2 2280 NVMe SSD socket, 1 x M.2 2280 SATA SSD socket, 2 x Type-C USB F/P Connector (1 connector enabled for DisplayPort alternate mode)
S80-P6 Mezzanine module - 1 x M.2 2280 NVMe SSD socket, 8 x Gigabit Ethernet via P6 backplane connector (TSN/AVB switch based solution)
Custom specific storage & I/O mezzanine module design

8HP/12HP Mezzanine side card options
SCL-RHYTHM Quad port GbE NIC, front panel M12 X-coded receptacles, dual M.2 (NVMe/SATA) SSD
SCZ-NVM Dual M.2 NVMe SSD, quad UART
Custom specific side card design - I/O and storage

Environmental & Regulatory

Suitable e.g. for industrial, transportation & instrumentation applications
Designed & manufactured in Germany
ISO 9001 certified quality management
Long term availability
Rugged solution
Coating, sealing, underfilling on request
Lifetime application support
RoHS compliant
Operating temperature 0°C to +70°C
Operating temperature -40°C to +85°C (industrial temperature range) on request
Storage temperature -40°C to +85°C, max. gradient 5°C/min
Humidity 5% ... 95% RH non condensing
Altitude -300m ... +3000m
Shock 15g 0.33ms, 6g 6ms
Vibration 1g 5-2000Hz
MTBF 11.9 years
EC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)

RT OS Board Support Packages & Driver

LynxOS - on request
On Time RTOS-32 - on request
OS-9 - on request
QNX
Real-Time Linux (RT Patch) - on request
RTX - on request
VxWorks 5.5 & 6.9 - on request
VxWorks 7.0 - on request
Others - on request

While mechanically compliant to CompactPCI® Classic, CompactPCI® Serial (PICMG® CPCIS.0) defines a completely new card slot, based on PCI Express®, SATA, Gigabit Ethernet and USB serial data lines. Up to 6 high-speed backplane connectors P1 - P6 are provided on a system slot controller such as the SC4-CONCERTO, which can be considered as a root hub with respect to most signal lines. A passive backplane is used for distribution of a defined subset of I/O channels from the system slot to each of up to eight peripheral slots in a CompactPCI® Serial system.

Most CompactPCI® Serial peripheral slot cards require only the backplane connector P1, which comprises PCIe, SATA and USB signals, resulting in a concise and inexpensive peripheral board design. More powerful peripheral cards profit from so called Fat Pipe slots (PCIe x 8). The SC4-CONCERTO is a native CompactPCI® Serial CPU card, suitable for usage in a pure CPCI Serial environment. Due to its generous backplane capabilities (22 x PCI Express® Gen3, 8 x USB, 6 x SATA RAID, 8 x GbE), very powerful industrial systems can be built.