General 
- PICMG® CompactPCI® Serial standard (CPCI-S.0) peripheral slot card or system slot card
- Single Size Eurocard 3U 4HP 100x160mm2
- CompactPCI® Serial backplane connectors P1, P6
- Suitable for PCIe® x 1 capable standard peripheral slots (for option on-board NIC)
- Suitable for CompactPCI® Serial backplane with star archtitecture Ethernet (P6)
|
Front Panel I/O
- 4 x M12 X-coded front panel GbE receptacles, rail approved, Cat6A, IEC 61076-2-109
- 1000BASE-T, 100BASE-TX, 10BASE-T compliant data transfer rate front ports
- Future proof investment into cabling infrastructure - up to 10Gbps with M12 Cat6A
- M12 X-coded to RJ45 connector Cat6A cable assemblies available from several suppliers
|
Backplane I/O (Option)
- CompactPCI® Serial backplane connector P1 used for PCI Express® x 1 lane to optional Intel® I210-IS Gigabit Ethernet Controller
- Option GbE backplane communication - CompactPCI® Serial backplane connector P6 used for 4 x GbE over backplane
- CompactPCI® Serial star type Ethernet architecture backplane suitable for control via system slot CPU card, up to eight SL2-BRASS individually connected to system slot CPU P6 Ethernet ports, for a total of up to 32 x M12 linked front panel switch ports (link type depends on CPU card P6 solution either switch or NIC)
- CompactPCI® Serial star type Ethernet architecture backplane suitable for cascading of up to five SL2-BRASS w/o CPU card, one SL2-BRASS master (system slot) is wired via P6 to a maximum of four SL2-BRASS slave boards (peripheral slots), for a total of up to 20 x M12 directly interconnected front panel switch ports
- CompactPCI® Serial backplane w/o P6, suitable for CPU control over up to eight SL2-BRASS by means of the optional on-board NIC, for a total of up to 32 x M12 front panel switch ports, for highest application flexibility (routers, LAN segmentation e.g.)
|
Gigabit Ethernet Switch
- Marvell® 88E6390 based Gigabit Ethernet switch (in use 8 x GbE MAC/PHY 1000BASE-T, 1 x GbE MAC/SerDes)
- High performance, non-blocking, Gigabit Ethernet
- Support for up to 16K MAC addresses, 10KByte Jumbo Frames
- Supports 802.1 Audio Video Bridging (AVB) Gen 2
- Time Sensitive Networking (TSN) Standards, IEEE 1588v2 one-step PTP
- Synchronous Ethernet
- Quality of Service (QoS) support with 8 traffic classes
- Supports 4096 802.1Q VLANs, three levels of 802.1Q security
- Unmanaged or managed solution
- Integrated microprocessor (IMP) enables enhanced managed switch designs (customer programming)
- IMP GUI debugger w. ANSI C compiler & assembler available on request from Marvell®
- Remote (in-band) management available on request via Marvell® SOHO Switch GUI Software
- Configurable in-band management through SerDes/SGMII switch port (connected to the optional on-board NIC), or GbE PHY switch port via P6 backplane Ethernet (1_ETH)
|
Gigabit Ethernet Controller (Option)
- Intel® I210-IS Gigabit Ethernet controller internally wired to GbE switch via SerDes
- 9.5KB Jumbo Frame support
- Hardware-based time stamping (IEEE 1588) and support for 802.1AS
- Option IEEE 802.1Qav compliant Audio-Video Bridging (AVB)
- IPv4, IPv6, TCP/UDP checksum offloads
- Based on PCI Expess® x 1 from CompactPCI® Serial backplane connector P1
- Driver support for all major operating systems
|
Applications
- Scalable (modular) GbE switching based on 19-inch rack mounting
- Light in-band management
- Railway usage via front panel M12 cabling
- Industrial IoT networking - TSN
|
Environmental, Regulatory
- Designed & manufactured in Germany
- Certified quality management according to ISO 9001
- Long term availability
- Rugged solution
- Ccoating, sealing, underfilling available on request
- RoHS compliant
- Operating temperature 0°C to +70°C (commercial temperature range) available
- Operating temperature -40°C to +85°C (industrial temperature range) available
- Storage temperature -40°C to +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 54.5 years
- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
- Power consumption 12V/0.4A max.
|
