EKF SU8-HUM CompactPCI Serial • Dual-Port Isolated RS-485 Interface

Details

• PICMG® CompactPCI® Serial standard (CPCI-S.0) peripheral slot Card
• Assembly unit comprising carrier board SK2-SESSION & XMC Module DU1-MUSTANG
• Single size Eurocard 3U 4HP 100x160mm²
• CPCI-S backplane connector P1
• XMC Module carrier board, equipped with XMC connector J15
• PCI Express® Gen1 (2.5Gbps) or Gen2 (5.0Gbps) supported
• Bidirectional PCIe redriver/repeater for optimum signal integrity
• PCI Express® clock buffer for optimum signal integrity
• XMC Module single-width mezzanine card 139mm x 74mm, stack height 10mm
• Equipped with dual-port UART
• PLX Oxford 950 UART w. 128-byte transmit/receive FIFO
• Asynchronous baud rates up to 15Mbps
• Windows® & Linux device driver support
• 5kV rms isolation barrier RS-485/RS-422 transceivers (Analog Devices)
• Configurable as half- or full-duplex
• ±15 kV ESD protection on RS-485 input/output pins
• Data rate 16 Mbps
• Connect up to 256 nodes on one bus (driver enable control via DTR)
• Open- and short-circuit, fail-safe receiver inputs
• High common-mode transient immunity >25 kV/µs
• Thermal shutdown protection
• Two front bezel male 9-pin D-Sub connectors
• RS-485 ports isolated against each other and board circuitry 250VAC
• On-board DIP-switches for full/half-duplex setting, and line termination on/off
• Suitable e.g. for CompactPCI® Serial System Slot Controller SC1-ALLEGRO (CPU Board)
• Suitable e.g. for CompactPCI® PlusIO System Slot Controller PC1-GROOVE (CPU Board)
• Commercial and industrial temperature range
• Rugged solution (coating/sealing available on request)
• Long term availability
• RoHS compliant