General- Mixed function mezzanine side card for EKF CompactPCI® Serial CPU boards
- Form factor single size Eurocard (board dimensions 100x160mm2)
- PICMG® CompactPCI® Serial (CPCI-S.0) system slot card
- Based on new mezzanine connectors HSE1/HSE2 (8 x PCIe® Gen3)
- Suitable e.g. for use with CPU cards SC4-CONCERTO, SC5-FESTIVAL
- 8HP assembly together with CPU card
- 24-lanes PCI® Express Gen3 switch
- Supports secondary CompactPCI® Serial backplane
- Provides Gigabit Ethernet front panel I/O (3 x RJ45)
- Provides USB 3.0 front panel I/O (3 x Type A)
- Provides mass storage capability (1 x M.2 NVMe/SATA, 1 x mSATA)
|
Backplane Connectors- CompactPCI® Serial backplane connectors P1, P2, P4, P5, system board pin assignment
- PCI® Express support for all eight peripheral slots of a secondary CompactPCI® Serial backplane
- Four links Gen3 x4 (available on peripheral slots 1, 2, 3, 5)
- Four links Gen2 x1 (available on peripheral slots 4, 6, 7, 8)
- Can be used with any standard CompactPCI® Serial backplane (system slot left aligned)
|
PCI Express® Switching- 24-lane 6-port PCI Express® Gen3 packet switch PEX 8724
- Upstream 1 x4 link wired to the HSE1 mezzanine connector (CPU card PCH)
- Downstream 4 x4 links to the CompactPCI® Serial backplane
- Downstream 1 x4 link to the NVMe SSD M.2 socket
- 6-lane 6-port PCI Express® Gen2 packet switch PI7C9X2G606PR
- Upstream 1 x1 link wired to the HSE2 mezzanine connector (CPU card PCH)
- Downstream 4 x1 links to the CompactPCI® Serial backplane
- 6-lane 6-port PCI Express® Gen2 packet switch PI7C9X2G606PR
- Upstream 1 x1 link wired to the HSE2 mezzanine connector (CPU card PCH)
- Downstream 3 x1 links to the I210 Gigabit Ethernet NICs
- Downstream 1 x1 link to the TUSB7320 USB controller
|
Front Panel I/O- 3 x RJ45 Gigabit Ethernet jacks, three individual on-board I210-IT controllers
- 1000BASE-T, 100BASE-TX, 10BASE-T compliant data transfer rate
- 3 x USB 3.0 (3.1 Gen1) Type A receptacles
- Two USB ports via on-Board USB controller, one USB port derived from HSE1 mezzanine connector
|
Networking- Three individual networking interface controllers (NIC), based on PCI Express®
- 1000BASE-T, 100BASE-TX, 10BASE-T connections
- Intel® I210-IT -40°C to +85°C operating temperature GbE controllers w. integrated PHY
- IPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient Ethernet
- IEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensitive streams (TSN)
- IEEE 1588 and 802.1AS packets time stamping for high-precision time synchronization
- All GbE ports wired via RJ45 front panel connectors
|
USB- Upper front panel receptacle wired to HSE1 mezzanine connector (CPU carrier card PCH)
- Middle and lower connectors wired to PCI Express® dual port USB 3.0 controller TUSB7320
- USB 3.1 Gen1 (formerly USB 3.0) xHCI (eXtensible host controller interface) SuperSpeed supported
- USB 2.0 high-speed, full-speed, low-speed supported
- 3 x front panel Type-A USB 3.0 host connectors
- VBUS (+5V) 1.5A high current power switches assigned to front panel connectors
|
Mass Storage Solutions- M.2 (formerly known as NGFF) socket for an NVMe type SSD module up to 2280 size
- PCI Express® Gen3 x4 interface (M-key socket)
- Socket height 4.2H (double sided module allowed)
- Capacity up to 2TB as of current
- Suitable for operating system installation (boot device)
- Alternate usage with an SATA type SSD B-M key
- Autosensing analog switch for selection between PCIe® and SATA operation
- On-Board 6G SATA controller 88SE9170
- PCI Express® Mini Card socket, full-size or half-size modules
- PCI Express® Mini Cards of all styles supported: USB 2.0 and PCIe® based, and mSATA
- Autosensing analog switch for selection between PCIe® and SATA operation
- On-Board 6G SATA controller 88SE9170
- Suitable for wireless applications e.g. WLAN, Bluetooth or 2G/3G/LTE modem card
- Micro SIM card holder associated (15mm x 12mm ETSI TS 102 221 V9.0.0, Mini-UICC)
- Suitable for fieldbus modules e.g. CAN-FD, and industrial Ethernet modules (real time networking)
- Custom specific F/P design for additional pigtail SMB antenna connectors (12HP front or wider)
- Custom specific F/P design for non-radio applications e.g. CAN-FD (12HP or wider)
|
Applications- Local expansion (side card) for EKF CPU boards
- System expansion with a secondary CompactPCI® Serial backplane
- Supports PCI Express® on up to eight peripheral slots (4x4 Gen3, 4x1 Gen2)
- Multi GPU card systems
- Autonomous driving test equipment
- Rugged environments
|
Regulation & Environmental- Designed & manufactured in Germany
- ISO 9001 certified quality management
- Custom specific development on request
- Long term availability
- Coating, sealing, underfilling on request
- RoHS compliant 2002/95/EC
- Operating temperature -40°C to +85°C (industrial temperature range)
- Storage temperature: -40°C to +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
- MTBF 23.7 years
|
