Form Factor- Proprietary size mezzanine module
- Fits basically into the 4HP (20.3mm) envelope of the CPU carrier board
- Typically delivered as a ready to use assembly unit (including SC4-CONCERTO or successor CPU card)
- Mounting position right (on top of a CPU board)
|
Host I/F Connectors HSE1/HSE2- High speed mezzanine connectors
- Suitable for PCI Express® Gen3
- Bottom mount male connectors HSE1 and HSE2 (high speed expansion)
- Mating with the carrier card female connectors HSE1/2
- Board-to-board height 10.8mm for a 4HP assembly
HSE1- PCI Express® x4 support (dedicated to the NVMe SSD module M.2 socket
- Power sourcing 12V/1.5 A maximum continuous current (2 pins)
HSE2- PCI Express® support (dedicated to the PCIe x1 based on-board Gigabit Ethernet controller)
- Power sourcing 12V/3.0 A maximum continuous current (4 pins)
|
M.2 NVMe Module Connector- Single M.2 socket, maximum M.2 size 2280 (M.2 formerly known as NGFF)
- Suitable for M.2 NVMe SSD module, key Id M, PCIe x4 I/F
- PCIe® 1x4 sourced via HSE1 mezzanine connector
- Maximum (theoretical) 32Gbps I/O data transfer rate (Gen3 PCIe 8GT/s)
- Power switch, undervoltage lockout, short-circuit protection, quick discharge
|
Gigabit Ethernet Switch- Marvell® 88E6390 based Gigabit Ethernet switch (in use 8 x GbE MAC/PHY 1000BASE-T, 1 x GbE MAC SerDes)
- Eight GbE ports wired to the backplane connector P6 (isolated by magmods)
- High performance, non-blocking, Gigabit Ethernet
- Support for up to 16K MAC addresses, 10KByte Jumbo Frames
- Supports 802.1 Audio Video Bridging (AVB) Gen 2
- Time Sensitive Networking (TSN) Standards, IEEE 1588v2 one-step PTP
- Synchronous Ethernet
- Quality of Service (QoS) support with 8 traffic classes
- Supports 4096 802.1Q VLANs, three levels of 802.1Q security
- Unmanaged or managed solution
- Integrated microprocessor (IMP) enables enhanced managed switch designs (customer programming)
- IMP GUI debugger w. ANSI C compiler & assembler available on request from Marvell®
- Remote (in-band) management available on request via Marvell® SOHO Switch GUI Software
- Configurable in-band management through SerDes switch port (connected to the optional on-board NIC), or GbE PHY switch port via P6 backplane Ethernet (1_ETH)
|
Gigabit Ethernet Controller- Intel® I210-IS Gigabit Ethernet controller internally wired to the GbE switch port 9 via SerDes
- 9.5KB Jumbo Frame support
- Hardware-based time stamping (IEEE 1588) and support for 802.1AS
- IEEE 802.1Qav compliant Audio-Video Bridging (AVB)
- IPv4, IPv6, TCP/UDP checksum offloads
- Based on PCI Expess® x1 derived from the mezzanine connector HSE2
- Driver support for all major operating systems
|
Applications- Low profile mezzanine module for EKF CPU Cards (SC4-CONCERTO and later)
- 4HP assembly CPU carrier board and S80-P6 mezzanine card
- Adds SSD mass storage and backplane Ethernet networking to the CPU carrier
- M.2 based mass storage, 1 x M.2 PCIe x4 socket (NVMe)
- On-board GbE switch for backplane communication and multiprocessing via backplane connector P6, eight GbE ports (suitable for single star architecture or full mesh or RIO)
|
Environmental & Regulatory- Designed & manufactured in Germany
- ISO 9001 certified quality management
- Long term availability
- Rugged solution
- Coating, sealing, underfilling on request
- Lifetime application support
- RoHS compliant
- Operating temperature 0°C to +70°C
- Operating temperature -40°C to +85°C (industrial temperature range) on request
- Storage temperature -40°C to +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 50.3 years
- EC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
|
