EKF S40-NVME Low Profile Mezzanine for Compact PCI Serial CPU Cards

Details

Form Factor Proprietary size mezzanine module 84.3mm x 95mm Fits basically into the 4HP (20.3mm) envelope of the CPU carrier board Typically delivered as a ready to use assembly unit (including SC4-CONCERTO or successor CPU card) Mounting position right (on top of a CPU board or CPU side card)

Host I/F Connectors HSE1/HSE2 High speed mezzanine connectors Suitable for PCI Express® Gen3, SATA 6G, USB 3.1, DisplayPort Bottom mount male connectors HSE1 and HSE2 (high speed expansion) Mating with the carrier card female connectors HSE1/2 Board-to-board height 10.0mm for a 4HP assembly HSE1 PCI Express® x4 support (dedicated to the NVMe SSD module M.2 socket 1 x USB 3.1 Gen1 5Gbps support (dedicated to the optional Type-C USB front panel connector) Power sourcing 12V/1.5 A maximum continuous current (2 pins) HSE2 PCI Express® x4 support (dedicated to PCIe based on-board SATA & USB controllers DisplayPort support (dedicated to Type-C front panel connector configurable for alternate use) Power sourcing 12V/3.0 A maximum continuous current (4 pins)

M.2 Module Connectors Two M.2 sockets 3.2H, for 1 x NVMe SSD, 1 x SATA SSD, maximum M.2 size 2280 M.2 component height labels S1 - S5 (single sided module) and D1 - D4 (double sided module) Power switches for each socket, undervoltage lockout, short-circuit protection, quick discharge M1 (NVMe) M.2 NVME SSD module socket, key Id M, PCIe x4 I/F PCIe x4 sourced via HSE1 mezzanine connector Maximum (theoretical) 32Gbps I/O data transfer rate (Gen3 PCIe 8GT/s) M2 (SATA) - Option M.2 SATA SSD module socket, key Id B, SATA I/F Sourced via on-board PCIe to SATA 6G controller Marvell 88SE9170 (wired to HSE2) Maximum 6Gbps data transfer rate

Type-C Front Panel Connectors - Option Two Type-C front panel receptacles Suitable for Type-C compliant cable assemblies Support for Type-C locking plugs (dual screw) according to the 'Locking Connector Spec. Rev. 1.0' VBUS over voltage, surge, and ESD protection Upper Receptacle Type-C Host mode USB 3.1 Gen 1 (5Gbps SuperSpeed), passed through from HSE1 mezzanine connector (CPU carrier card USB host controller e.g. PCH) Downstream Facing Port (DFP) controller and power switch, up to 5V/3A VBUS 10Gbps MUX for Type-C flip control (signal flow according to the cable plug orientation) USB 3.1 Gen 2 ready (10Gbps SuperSpeed+) for future CPU chipset generation Lower Receptacle Type-C Two basic operation modes supported: Host mode USB 3.1 Gen 1, sourced from on-board PCIe USB 3.0 host controller DisplayPort Alternate Mode (VESA ALT Mode), DP video signals derived from HSE2 mezzanine connector (CPU carrier card graphics controller) Active switch fabric with redriver and equalization - support for USB 3.1 Gen1 5Gbps SS and DisplayPort 1.4 4 Lanes 8.1Gbps (DP characteristics in accordance to CPU carrier card GPU) Configurations supported VESA C/D/E/F e.g. USB 3.1, DisplayPort 4 lanes, and concurrent USB 3.1 plus DisplayPort 2 lanes Power switch, up to 5V/3A VBUS

Applications Low profile mezzanine module for EKF CPU Cards (SC4-CONCERTO and later) 4HP assembly CPU carrier board and S40-NVME mezzanine card M.2 based mass storage, 1 x M.2 SATA socket, 1 x M.2 PCIe x4 socket (NVMe) Optional front panel I/O (2 x Type-C, dual screw locking) Front I/O 1 x USB 3.1 Gen 1, 1 x USB 3.1 Gen1 & DisplayPort alternate mode

Environmental & Regulatory Designed & manufactured in Germany ISO 9001 certified quality management Long term availability Rugged solution Coating, sealing, underfilling on request Lifetime application support RoHS compliant Operating temperature 0°C to +70°C Operating temperature -40°C to +85°C (industrial temperature range) on request Storage temperature -40°C to +85°C, max. gradient 5°C/min Humidity 5% ... 95% RH non condensing Altitude -300m ... +3000m Shock 15g 0.33ms, 6g 6ms Vibration 1g 5-2000Hz MTBF 50.1 years EC Regulatory EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)