General- Mixed function mezzanine side card for CompactPCI® PlusIO CPU boards
- Provides additional front panel I/O, on-board M.2 based SATA SSD mass storage, and optional rear I/O capabilities across the J2 backplane connector
- Suitable for use with the EKF PC6-TANGO low power CPU board
- 8HP assembly together with CPU card
- 12HP assembly in total with CPU card and C32-FIO mezzanine
|
Front Panel I/O- Dual RS-232 connectors male DSUB-9 (COM port pin assignment, MAX3243 transceivers)
- Option dual USB 2.0 connectors, electronic power switches 1.5A
- Option single USB 2.0 connector and 2 x analog audio F/P jacks 3.5mm in/out
- Option C32-FIO mezzanine for additional front panel I/O (2 x RS-232, PS/2 KB/MS)
- Integrated 8HP front panel for CPU carrier card and PCU-UPTEMPO
- Integrated 12HP front panel when C32-FIO 3rd floor mezzanine is installed in addition
|
Mass Storage- Dual M.2 sockets (formerly known as NGFF), B-coded, SATA 3.0 6G speed, classic AHCI protocol, suitable for installation of any popular operating system
- Lower on-board M.2 socket suitable for an SATA 6G based SSD M.2 module up to 22110 size, wired to the HSE mezzanine connector SATA port 1, derived directly from the PC6-TANGO carrier card Intel® APL-I SoC, Intel® driver support
- Upper on-board M.2 socket suitable for an SATA 6G based SSD M.2 module up to 2280 size, wired to the HSE mezzanine connector SATA port 2, derived from the PC6-TANGO on-board Marvell® 9170 PCIe to SATA controller (may not be populated on all PC6-TANGO SKUs)
|
On-Board Functions- SIO (Super I/O Controller) SCH3114 attached to the LPC interface (4 x UART, PS/2, GPIO)
- HD-Audio Codec ALC262 (option)
|
Rear I/O Option- Rear I/O is optional - available on customers request
- Rear I/O connector J2 as defined by the CompactPCI® specification
- Legacy interface rear I/O option KB/MS, up to 4 x UART, GPIO
|
Environmental & Regulatory- Designed & manufactured in Germany
- ISO 9001 certified quality management
- Long term availability
- Rugged solution
- Coating, sealing, underfilling on request
- Custom specific development available on request
- RoHS compliant
- Operating Temperature: 0°C to +70°C
- Operating temperature -40°C to +85°C (industrial temperature range) on request
- Storage Temperature: -40°C to +85°C, max. Gradient 5°C/min
- Humidity 5% ... 95% RH non Condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
- MTBF 75.5 years
|
