| Form Factor | - XMC single-width mezzanine card 149mm x 74mm
- Stack height 10mm XMC to host
|
Host I/F
Connectors | - P15 XMC - PCI Express, single lane, single link
- Option XMC 2.0 connector P15 (white housing)
- P14 PMC (Option) - Rear I/O SATA
|
| SATA Controller | - JMB363 PCI Express to SATA controller
- Dual-channel SATA II 3Gbps
- Option RAID Level 0/1/10
- Serial ATA AHCI compliant
- Supports SATA II Gen1m and Gen2m (eSATA)
- Supports Native Command Queuing (NCQ)
- Drivers available at ftp://driver.jmicron.com.tw
|
| Solid State Drive | - Module suitable for 1.8-inch Micro SATA SSD (alternatively hard disk drive), dimensions according to SFF-8144 (54mm x 78.5mm x 5mm)
- Variety of industrial grade Micro SATA SSD manufacturers, e.g. Intel, Micron, Samsung, SanDisk, STEC, Supertalent, 64GB or beyond, SLC or MLC available, high speed data transfer
- SSD can be provided by EKF or by customer
- Single- or dual-drive option (RAID option for dual-drive)
|
| SATA Connectors | - Each SATA channel can be individually assigned either to an on-board drive, to a front bezel eSATA receptacle, or to the rear I/O connector (these are permanent manufacturing options, consider before ordering)
- P1: 15-pos. Micro SATA connector, suitable for 1.8-inch top mount drive (side 1 - module component side), option
- P2: 15-pos. Micro SATA connector, suitable for 1.8-inch bottom mount drive (side 2 - module back side), option
- P3, P4: Front bezel eSATA receptacles channel 1 / 2, option
- P14: PMC rear I/O connector, option
|
| Thermal Conditions | - Operating temperature: 0°C ... +70°C
- Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
|
| Environmental Conditions | - Humidity 5% ... 95% non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
|
| MTBF | tbd * 106h |
subject to technical changes
