- Form factor XMC single-width mezzanine card 139mm x 74mm
- Stack height 10mm XMC to host
- Host I/F Connector P15 XMC - PCI Express, single lane, single link
- Option P15 connector according to XMC 2.0 (white housing)
- +3.3V operated (VPWR not in use)
|
- PCI Express® bridge to dual-port UART
- PLX Oxford 950 UART w. 128-byte transmit/receive FIFO
- Asynchronous baud rates up to 15Mbps
- Windows® & Linux device driver support
|
- 5kV rms isolation barrier RS-485/RS-422 transceivers (Analog Devices)
- Configurable as half or full duplex
- ±15 kV ESD protection on RS-485 input/output pins
- Data rate 16 Mbps
- Connect up to 256 nodes on one bus (driver enable control via DTR)
- Open- and short-circuit, fail-safe receiver inputs
- High common-mode transient immunity >25 kV/µs
- Thermal shutdown protection
- Two front bezel male 9-pin D-Sub connectors
- RS-485 ports isolated against each other and board circuitry (limited to 250VAC by D-Sub connector characteristics)
- On-board DIP-switches for full/half-duplex setting, and line termination on/off
|
- Long Term Availability
- Coating, Sealing, Underfilling on Request
- RoHS compliant 2002/95/EC
- Operating temperature: 0°C ... +70°C (industrial temperature range on request)
- Storage temperature: -40°C ... +125°C, max. gradient 5°C/min
- Humidity 5% ... 95% non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 121.5 years
- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
|
subject to technical changes
