CompactPCI®- PICMG® CompactPCI® Classic (CPCI 2.0) standard
- Single size Eurocard 3U 4HP 100x160mm2
- Suitable for CompactPCI® peripheral slot
- CompactPCI® backplane connector J1 for PCI® 32-bit 33/66MHz support
- Option CompactPCI® backplane connector J2 for rear I/O (4 x UART TTL level signals)
- On-board PCI® to PCI Express® bridge
- Option +5V only power supply
|
UART- Pericom® PCI Express® quad UART PI7C9X7958
- High performance 950-class UARTs
- 16C550 software compatible
- 128-Byte FIFO for each transmitter/receiver
- Baud rate up to 15Mbps
- XON/XOFF in-band flow control
- CTS/RTS or DSR/DTR out-of-band control & driver enable signal for PartyLine operation
- Data frame 5, 6, 7, 8 and 9 bits
- Clock prescaling 4 to 46
- Windows® & Linux device driver support
|
RS-485 Transceivers- 5kV rms isolation barrier RS-485/RS-422 transceivers (Analog Devices)
- Configurable as half- or full-duplex
- ±15 kV ESD protection on RS-485 input/output pins
- Transceiver data rate 16Mbps max.
- Connect up to 256 nodes on one PartyLine bus (driver enable control via dedicated UART mode select outputs)
- Open- and short-circuit, fail-safe receiver inputs
- High common-mode transient immunity >25 kV/µs
- Thermal shutdown protection
- 4 x front panel RJ45 connectors 8-lead, three different pin assignments available for order:
- RJ45 CUD-TWIST native pin order, optimized for full-duplex via Ethernet cross-over patch cables
- RJ45 CU4-SOPRANO legacy pin arrangement for seamless changeover of applications
- RJ45 Half-duplex operation optimized via straight Ethernet patch cable
- RS-485 front ports isolated against each other and board circuitry
- On-board DIP-switches for full/half-duplex setting, and line termination on/off
- Ordering option D-Sub 9-pin front panel connectors (4 ports require 8HP F/P)
|
Environment, Regulatory- Designed & manufactured in Germany
- Certified quality management according to ISO 9001
- Long term availability
- Rugged solution (coating/sealing available on request)
- Custom specific modifications on request
- RoHS compliant
- Operation temperature -40°C to +85°C (industrial temperature range)
- Storage temperature -40°C to +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 34.7 years
- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
|
