Printed Circuit Board | Dimensions | 3U Eurocard (100x160mm), front panel width 20.2mm (4HP), mechanics constructed with respect to EMC requirements, ejector lever |
SCSI Bus | Bus Type | 8/16-Bit, Single Ended, max. 7 devices (8-Bit), 15 devices (16-Bit) |
Performance | Wide Ultra 40MByte/s (16-Bit), Narrow Ultra 20MByte/s (8-Bit) Wide Fast 20MByte/s (16-Bit), Narrow Fast 10MByte/s (8-Bit) Asynchronous 14MByte/s |
Connector External | 68-pos., high density receptacle (metal screen), screw lock 2-56 UNC (SCSI-3) |
1. Connector Internal | 68-pos. high density socket 90 (Wide) |
2. Connector Internal | 50-pos. header 2.54mm, 180 (Narrow) |
Total SCSI Cable Length | SCSI-1 (asynchronous) 6m Fast SCSI and Wide Fast SCSI 3m Ultra SCSI and Wide Ultra SCSI 3m (4 devices), 1.5m (8 devices) |
Termination | active, switched automatically termination power with Polyswitch (reversible fuse 1.25A) |
Controller Chip | I/O processor SYM53C875J pre-fetches of 8 SCRIPTS™ dword instructions minimize PCI bus load load and store SCRIPTS™ instruction increases performance includes 4kB internal RAM for SCRIPTS™ instruction storage optimized block transfers at Ultra SCSI clock rates 536 Byte DMA FIFO SCAM (SCSI Configured AutoMatically) level 1 functionality target disconnect/reconnect (interrupt) Symbios TolerANT™ SCSI signal filtering |
CompactPCI® Bus | Connector J1 | PCI 2.1, 32-Bit, 33MHz (133MB/s) PCI Extended Access Cycles 32-Bit DMA Bus Master (133MB/s) zero wait state PCI transfers bursts up to 128 dwords across PCI bus 3.3V or 5V interface |
Power Consumption | Connector J1 | +5V ±5% 1.5A max. (including termination power) +3.3V ±0.3V 130mA max. (when operating in a 3.3V VIO slot) VIO (+5V or +3.3V) 0.1A max +12V ±5% 50mA max. (when programming Flash EEPROM) |
Temperature Humidity | Commercial Grade Version | operating temperature 0-70°C humidity 5-90% non condensing |