Home
EKF
EKF CG2-SHANTY Compact PCI GPS Receiver Module

EKF CG2-SHANTY Compact PCI GPS Receiver Module

BRAND : EKF

Board FormFactor

3U Eurocard (100x160mm²), front panel width 20.3mm (4HP)

Serial Interfaces
SP1 (internally)
SP2 (externally and internally)
SP3, SP4 (optional usage)

Device: 16C550 compatible Quad PCI UART Oxford OXmPCI954 asynchronous serial protocol: 1 startbit; 7 or 8 databits; 1 or 2 stopbits; optional even/odd parity; bitrates up to 15Mbps
SP1/SP2: typical settings for GPS operation SP1=4800Baud (GPS NMEA-0183), SP2=9600Baud (DGPS RTCM SC-104)
SP2 front panel connector: PC compatible D-SUB connector 9-pin male, to be used either as DGPS input or as universal serial COM port, ESD protection 15kV, RS-232E transceiver can be disabled by removing jumper J-SP2 (option)
SP3/SP4: on-board pin headers suitable for attachment of CU7-RS485 and CU8-RS232 PHY-modules (option)
Serial driver software (COM port emulation) available

GPS

Exchangeable modular 12-channel receiver, chipset SiRFstarII, SMB jack for 1575,42MHz (L1 Band) GPS antenna,...

Request A Quote

Description

Description

Details

Board FormFactor	3U Eurocard (100x160mm²), front panel width 20.3mm (4HP)
Serial Interfaces SP1 (internally) SP2 (externally and internally) SP3, SP4 (optional usage)	Device: 16C550 compatible Quad PCI UART Oxford OXmPCI954 asynchronous serial protocol: 1 startbit; 7 or 8 databits; 1 or 2 stopbits; optional even/odd parity; bitrates up to 15Mbps SP1/SP2: typical settings for GPS operation SP1=4800Baud (GPS NMEA-0183), SP2=9600Baud (DGPS RTCM SC-104) SP2 front panel connector: PC compatible D-SUB connector 9-pin male, to be used either as DGPS input or as universal serial COM port, ESD protection 15kV, RS-232E transceiver can be disabled by removing jumper J-SP2 (option) SP3/SP4: on-board pin headers suitable for attachment of CU7-RS485 and CU8-RS232 PHY-modules (option) Serial driver software (COM port emulation) available
GPS	Exchangeable modular 12-channel receiver, chipset SiRFstarII, SMB jack for 1575,42MHz (L1 Band) GPS antenna, supply 0V (passive antenna), +5V, +3.3V (active antenna) selectable with jumper J-ANT Accuracy (horizontal) better than 3m (CEP), 5m (2 dRMS) Acquisition performance: hot start 8s, warm start 38s, cold start 45s Dead Reckoning capability SRAM and RTC data non-volatile buffered by Lithium cell 190mAh (>10000h) Selected NMEA-0183 ASCII messages: latitude, longitude, elevation, velocity, heading, time, satellite tracking status, command/control messages (primary serial I/F) SiRF binary protocol: raw data (primary serial I/F) RTCM ASCII protocol (secondary serial I/F) 1pps output with better than 1us timing accuracy
CompactPCI® Bus	32-bit 33MHz (133MB/s) +5V/+3.3V VIO (J1 connector not keyed)
Power Consumption	+5V ±0.25V 0.1A max. +3.3V ±0.15V 0.15A max.
Environmental Conditions	Operating temperature: -40°C ... +85°C Storage temperature: -40°C ... +85°C Humidity 5% ... 95% non-condensing Altitude -300m ... +18000m Shock 15g 0.33ms, 6g 6ms Vibration 1g 5-2000Hz
EC Regulations	EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1) 2002/95/EC (RoHS)
MTBF	tbd h

technical specifications are subject to change wihout further notice

EKF WinGPS
A Windows® Tool to Display GPS Data and Synchronize System Time

Ordering Information
Alias	Ordering Number	Short Description
SHANTY	CG2-1-SHANTY	3U CompactPCI hostadapter, 12-channel GPS receiver
ADAPT	CR9-5-ADAPT	Mechanical kit, expands front panel from 3 U to 6U
	940.80.20125.1	GPS antenna, active +5V, SMB connector, ~5m cable length
	940.80.90100.1	External DGPS LW receiver box, including ALF license (Accurate Positioning by Low Frequency, transmitter Mainflingen/Frankfurt, receiver radius about 650km)