| Summary of Technical Features |
| Printed Circuit Board | 3U Eurocard (100x160mm2), front panel 4HP (20.3mm) |
| Front Panel Elements | - Three Molex receptacles, 6-leads with 12V power distribution, individually current protected by 1.5A resettable fuses
- Dual-LED, indicating PHY power present and cable active status
|
| IEEE 1394 Chipset | - Texas Instruments OHCI Link Layer Controller 100, 200 und 400Mbps, IEEE 1394a-2000
- Texas Instruments PHY 100, 200 und 400Mbps, IEEE 1394a-2000, Triple-Cable Transceiver/Arbiter, Cable Port Monitor, Cable Power Monitor, transceiver disabled when cable not active, short reset, switching regulator powers PHY from cable when board is switched off (1394 hub function maintained when CPCI system is powered down)
|
| CompactPCI® | - 32-Bit, 33MHz (133MB/s), 3.3V or 5V interface, peripheral slot CPCI connector J1
- Ready for usage within PXI® systems
|
| Power Requirements | - +5V ±5% 0.1A max.
- +3.3V ±0.3V 0.3A max.
- +12V ±5% 0.1A max. (whithout 1394 cable power charge)
- +12V ±5% 1.6A max. (with 1394 cable power at max. load)
- VIO +3.3V or +5V compliant, max. 0.1A
|
| Thermal Conditions Environmental Conditions | - Operating temperature 0° ... 70°C (industrial temperature range available on request)
- Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
- Humidity: 5% ... 95% relative humidity, non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
|
| Regulations | - EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
- 2002/95/EC (RoHS)
|
| MTBF | 0.3 x 106h |
