What are you looking for?

Barksdale Series 433, 435, 436 Non-Incendive Transducer

BRAND : Barksdale

Barksdale's 430 Series Non-IncendiveTransducers prevent an explosion from occurring when operated in a Division II environment. Barksdale's 430 Series, non-incendive transducers prevent personal injury and machinery damage by preventing the explosion in the first place. Energy generated within the transducer is of such a low level that intermittently present flammable vapors will not be ignited. External zener barriers are not required in order to meet UL requirements for a non-incendive installation. Three models are available: Series 433 (0-5V), Series 435 (4-20mA) and Series 436 (0-10V).

General Specifications*

Accuracy (LH & R):

Details

Barksdale's 430 Series Non-IncendiveTransducers prevent an explosion from occurring when operated in a Division II environment. Barksdale's 430 Series, non-incendive transducers prevent personal injury and machinery damage by preventing the explosion in the first place. Energy generated within the transducer is of such a low level that intermittently present flammable vapors will not be ignited. External zener barriers are not required in order to meet UL requirements for a non-incendive installation. Three models are available: Series 433 (0-5V), Series 435 (4-20mA) and Series 436 (0-10V).

General Specifications*

Accuracy (LH & R):±0.25% FSO at 75°F (±0.5% for vacuum only [-23]) typical
Long Term Stability:±0.5% FSO of calibration curve
Typical Life Cycle:100 million cycles
Proof Pressure:2 times rated pressure or 13,000 psi max. (884 bar), whichever is less
Input:
433:
436:
435:

Excitation voltage: 11 to 30 VDC
Excitation voltage: 14 to 30 VDC
Excitation voltage: 12 to 28 VDC
Supply Current:3.0 mA maximum (no load)
Min. Load Resistance:2K ohms (voltage series)
Output:
433:



436:



435:

Output: 0.5 to 5.5 VDC
Full scale output: 5.0 VDC ± 0.8%
Zero output: 0.5 VDC ± 0.4%

Output: 1 to 11 VDC
Full scale output: 10 VDC ± 0.4%
Zero output: 1.0 VDC ± 0.2%

Output: 4 to 20 mA
Full scale output: 16 mA ± 1%
Zero output: 4 mA ± 2%
Wetted Parts:17-4 PH (fitting) & 300 stainless steel (sensor)
Enclosure:NEMA 4, 300 series stainless steel
Pressure Connection:1/4”-18 NPT male
Response Time:2kHz
Electrical Connection:3 conductor for voltage series and 2 conductor for current series, 24 awg, PVC jacketed, shielded cable, 3 ft. (1 m) long with integral strain relief and case ground (standard).
Temperature Ranges:
Operating:
Compensated:
Storage:

-40° to 158°F (-40° to 70°C)
-40° to 158°F (-40° to 70°C)
-40° to 185°F (-40° to 85°C)
Temperature Shift:
Zero & Span:

0.01% per °F over compensated range
Vibration:15 g’s, 10-2000 Hz, MIL-STD 202
Shock:50 g’s, 11 ms, MIL-STD 202 Method 213, Cond. G.
Approvals:Nonincendive pressure transmitters are UL and cUL approved as telemetering equipment for use in Div. 2 hazardous locations as follows:

Class I, Div. 2, Groups A, B, C & D
Class II, Div. 2 Groups F & G

Agency approval varies by electrical termination type as follows:

H5(-E) models are cULus listed in UL File E146589, (WYMV, WYMV7).
H3(-E), T4(-E) & T5 (-E) models are cURus recognized components in UL File E146589, (WYMV2, WYMV8).
Weight:
433 & 436:

435:

7.4 oz. (221 grams) to 1,000 psi
9.9 oz. (281 grams) 2,000 psi and higher
7.4 oz. (210 grams) to 1,000 psi
9.4 oz. (266 grams) 2,000 psi and higher
Warranty:1 year warranty
* See product confi gurator for additional options.

Wiring Code

MILLIVOLT SERIES - 433 & 436
(T4/T5)(H3/H5)Signal
1Red+ Excitation
3White+ Output
2BlackCommon
4BareDrain
MILLIAMP SERIES - 435
1Red+ Excitation
2Black- Excitation
4BareCase Drain