What are you looking for?

Barksdale 52520 Series Cab Air Suspension Valve

BRAND : Barksdale

Cab Valve - 52520 Series

The 52520 Air Suspension Valve utilizes Barksdale’s patented Shear-Seal® technology to accurately control suspension height in commercial truck cabin applications. Shear-Seal® has become the industry leader through superior performance and long life, even under the most demanding conditions. The Shear-Seal® advantage combined with enclosed housing enables high dirt/contamination resistance.

Barksdale height control valves feature proportional response for minimal air consumption near deadband and better driver comfort. At the same time, new stem-less cartridge fittings and tamper-resistant screws increase robustness in the field. The Barksdale valve’s compact design and two sets of mounting holes (M6 & M8) allow easy direct replacement and installation in current cab air suspension systems.

Details

Cab Valve - 52520 Series

The 52520 Air Suspension Valve utilizes Barksdale’s patented Shear-Seal® technology to accurately control suspension height in commercial truck cabin applications. Shear-Seal® has become the industry leader through superior performance and long life, even under the most demanding conditions. The Shear-Seal® advantage combined with enclosed housing enables high dirt/contamination resistance.

Barksdale height control valves feature proportional response for minimal air consumption near deadband and better driver comfort. At the same time, new stem-less cartridge fittings and tamper-resistant screws increase robustness in the field. The Barksdale valve’s compact design and two sets of mounting holes (M6 & M8) allow easy direct replacement and installation in current cab air suspension systems.

General Specifications*

Operating Media:Air
Seal Type:Shear-Seal®
Operating
Pressure:

130 PSI (9 bar) Maximum
Operating
Temperature:

-40ºF to +185ºF (-40ºC to +85ºC)
Flow Curve:Proportional response
Maximum Flow Rate:Standard flow: 120 L/Min (4.2 cfm) Maximum flow: 140L/min (4.94 cfm)
*Contact factory for higher flow options
Port Size:1/4” Push in tube*
6mm Push in tube
*DOT approved
Mounting Through
Holes:

M6 38.1mm (1.5in) M8 46.4mm (1.83in)
Linkage Mounting
Hole :

0.25” (6.3 mm) or 0.38” (9.5 mm)
Maximum Handle
Movement:

+/- 75º For fill or exhaust
Materials Of
Construction:

Body & Housing:
Engineered plastics
Arm: Zinc plated steel
Internal Elements: Stainless steel and hard anodized aluminum
Seals: HNBR
Weight (typical):0.4 lb (175g)


Other Suggested Products

Products