Details
630Du and DuN, 630Bp and BpN peristaltic process pumps fitted with 620L high accuracy, low pulse pumphead or 620LG pumphead for GORE® STA-PURE Series PCS® or GORE® STA-PURE Series PFL® tube
- 630 range of peristaltic process pumps offer four drive options, color display and intuitive menu structures provide visual status indication and minimal key presses
- Flow rates up to 3.25 gpm
- Industrial integration - manual, remote, Analog and digital communication, plus PROFIBUS
- Keypad incorporates 3-level security PIN lock
- The 620L pumphead splits fluid flow into twin offset channels, and reunites them so that pulsation is eliminated to allow accurate dosing
- Du and Bp pumps are NEMA 2 rated cased pumps. DuN and BpN are NEMA 4X rated cased pumps
620L twin-channel pumphead
- 620L is a specialist 2 bar, six-roller pumphead designed for accurate dispensing to ±0.5%. Minimal pulsation is achieved by splitting the inlet flow into two tubes passing over twin, offset tracks. The two sets of out-of-phase pulses cancel each other out when the channels merge.
- Uses 4.0mm wall Y-elements in a choice of six materials, or continuous tubing
- Two single channels are also available
- Tubing choices: 8mm, 12mm, and 16mm bore, offering flow rates from 0.00053 to 3.3 gpm
- Dispenses 500ml in 3.5 seconds
620RE4 LoadSure tube element pumphead
- 620RE4 is a high-performance, accurate, four-roller pumphead with LoadSure rapid tube element change technology. 4mm wall elements in 12mm or 17mm bore sizes allow pressures up to 60 psi and flow rates up to 3.32 gpm with minimized pulsation.
- Elements are available with industry-standard tri-clamp sanitary fittings; and with Cam and Groove fittings for industry.
620RE LoadSure tube element pumphead
- 620RE is a high-performance, accurate, two-roller pumphead with LoadSure rapid tube element change technology.
- 4mm wall elements in 12mm or 17mm bore sizes allow pressures up to 60 psi and flow rates up to 4.8 gpm.
- Elements are available with industry-standard tri-clamp sanitary fittings; and with Cam and Groove fittings for industry.
620R continuous tubing pumphead
- 620R pumphead accommodates 3.2mm wall continuous tubing in four bore sizes from 6.4mm to 15.9mm, giving up to 4.2 gpm flow at up to 30 psi pressure.
- Tubing is available in eight materials for almost any chemical requirement.