Wandfluh WDE45/23x50 Solenoid coil
BRAND : Wandfluh
for 28VDC applications with a protection diode
Wandfluh has extended the solenoid coil WDE45 / 23x50 with a 28VDC voltage. The coil can be sensibly used where the supply voltage nominally rather is at 28VDC. If a 24V coil is used for this voltage, this leads to a reduction in the operating condition with respect to the maximum ambient temperature and the maximum duty factor. With the 28V coil, this situation can be avoided, and the characteristic values listed in the data sheet are fully available.
The 28VDC coil has, in a...
Details
for 28VDC applications with a protection diode
Wandfluh has extended the solenoid coil WDE45 / 23x50 with a 28VDC voltage. The coil can be sensibly used where the supply voltage nominally rather is at 28VDC. If a 24V coil is used for this voltage, this leads to a reduction in the operating condition with respect to the maximum ambient temperature and the maximum duty factor. With the 28V coil, this situation can be avoided, and the characteristic values listed in the data sheet are fully available.
The 28VDC coil has, in addition, an integrated bipolar protection diode (TVS), which reduces voltage peaks caused when the coil is switched off and consequently protects devices that are connected to the same voltage supply.
