BRAND : Toni Technik
consisting of the following components:
ToniTROL ,,Standard"
Microprocessor controlled measuring and control system with 4
consisting of the following components:
ToniTROL ,,Standard"
Microprocessor controlled measuring and
control system with 4 serial
and one parallel
interface and basic software for load controlled tests.
ToniNORM Powerbox
with all hydraulic
components, power supply unit and servo
valve for bypass
control (closed loop).
400 V, 50/60 Hz, 3 phases
Load
Frame for Compression Tests with
max. 300 kN EN 196, lSO 679, ASTM C 109, BS 4550-3
- two-column design
-
force measurement with DMS load cell
load
measurement range 3.0
... 300 kN
piston
stroke 60 mm
pressure
plate distance 65 mm distance between columns 210 mm Model 1543
Load Frame for Bending Strength
Tests with max. 10 kN
EN 196 / ASTM C 348
- two-column design
- force measurement with DMS load cell load measurement range 0.1... 10 kN
piston stroke 30
mm
support distance 100 mm
support
width 45 mm diameter of bending
edges 10 mm Lichter Saulenabstand 155 mm Model 1544
Combined test area protection
with electrical lock and sefety circuit
A third load frame can be connected to the Powerbox if required, e.g. a 3000 kN load frame for compression tests of concrete specimens.
Set of pressure plates 40 x 40 mm
Set of pressure plates 50 x 50 mm
Set of pressure plates 79.4 x 74 mm
Set of pressure plates 70.7 x 70.7 mm
Adapter Flange
for testing prisms 40x40x160 mm in a vertical
position,
e.g. for the determination of the Modulus of Elasticicity
Adapter Flange
for testing specimens up to 100 mm height
Centering Device for Specimens
to center the specimen on the lower pressure plate
Manually Operated Bending Device
to break the prisms 40x40x160mm into halves
Further
pressure plates and accessories are available on request.