What are you looking for?

Tecsis EGS08 Limit Switch

BRAND : Tecsis

Details

The limit switch EGS08 allows to control 3 limit values via 3 relays. Load cells with an outputsignal range of 4...20mA can be connected to it. The housing is prepared for top hat rail mounting.

Features

  • Analog limit switch for top hat rail mounting
  • For sensors with 4...20mA output 2-/3-wire
  • tecsis force transducers with SIL3-relay connectable
  • 3 potential free relay contacts (closing contacts) with status LED
  • Accuracy 0,3% of the full scale
  • Potentiometer allows easy adjusting of the limit values
  • Cable break and loose rope recognition
  • Sensor supply 21 VDC, max. 50 mA
  • Needed supply energy 24 VAC or VDC
  • User-friendly and easy to maintain because of big screw type terminals
  • Compact design
  • Filter settings selectable through solder bridges
  • Protection class IP 40

Application

In combination with load cells or force transducers the limit switch EGS08 is utilized in weighing and load control in hoisting devices, cranes and more. Connectable are force transducer or load cells with an output signal of 4...20 mA in 2- or 3-wire design. By changing a solder bridge an input range of 1...9 mA can be choosen. The internal sensor supply is 21 VDC with max 50 mA. Usually the switch is not pre-adjusted and the customer connects it to the force transducer and also adjusts it. The adjustment of the level of the 3 limit values, which correlates to a certain load of the connected strain gauges, is done by a potentiometer. When turned off or not supplied with power the three relay contacts drop off. If one of the sensors is broken or not connected all relays switch to the state of overload. A status LED for each relay illuminates as long as the contact is closed. The limit switch is designed for top hat rail mounting in a switch cabinet. The robust full housing also allows stand-alone mounting.