What are you looking for?

Olaer OLV 4/250 Accumulator Bladder

BRAND : Olaer

Construction Bladder accumulator with sieve plate, pressure vessel of stainless steel 316L/1.4404, welded, heavy duty gas inlet valve, not detechable. Pre-Charge pressure PO Between 0,9 P1 and 0,2 P2 , max. 20 bar Other pressure ratios on request. Temperature range -20 °C to +100 °C Other ranges on request. Volumetric flow Q The max. values given in the selection table apply only for a vertical installation (hydraulic assembly downwards). For horizontal installation or higher flow rates please contact OLAER. Hydraulic fluids Hydraulic oil (mineral oil), water. Other mediums, such as biodegradable hydraulic oil, non-flammable liquids, emulsions, fuels, ect. should be specified at the time of ordering. Installation Vertical (hydraulic assembly downwards) to horizontal. Leave a space of 200 mm free above the gas inlet valve for attaching the tester and pressurizer instrument. Method of mounting Clamps, see data sheet OSP 775

Details

Construction Bladder accumulator with sieve plate, pressure vessel of stainless steel 316L/1.4404, welded, heavy duty gas inlet valve, not detechable. Pre-Charge pressure PO Between 0,9 P1 and 0,2 P2 , max. 20 bar Other pressure ratios on request. Temperature range -20 °C to +100 °C Other ranges on request. Volumetric flow Q The max. values given in the selection table apply only for a vertical installation (hydraulic assembly downwards). For horizontal installation or higher flow rates please contact OLAER. Hydraulic fluids Hydraulic oil (mineral oil), water. Other mediums, such as biodegradable hydraulic oil, non-flammable liquids, emulsions, fuels, ect. should be specified at the time of ordering. Installation Vertical (hydraulic assembly downwards) to horizontal. Leave a space of 200 mm free above the gas inlet valve for attaching the tester and pressurizer instrument. Method of mounting Clamps, see data sheet OSP 775