Nuova General D10/C Safety Relief Valve

Details

Type: Type:	D10 / C	do: 10mm	Area: 78.50mm 2
Homologation approval	PN	Coefficient efflux reduced Reduced flow coefficient	Calibration range Setting range
ED 2014/68 / EU IV Cat. (PED)	60	0.77; > 3 bar 0.86	0.3 - 60.0 bar
EAC	60	0.77; > 3 bar 0.86	0.3 - 60.0 bar
ATEX Ex II 2 G c	60	0.77; > 3 bar 0.86	0.3 - 60.0 bar
ATEX Ex II 2 D c (1)	60	0.77; > 3 bar 0.86	0.3 - 60.0 bar
ASME VIII Div.1	60	0.629	1.0 - 60.0 bar
Canadian Reg. CRN	60	0.629	1.0 - 60.0 bar
CONFIGURATION - CONFIGURATION
Material Material	Brass Brass	Mixed Brass-Stainless steel Mixed Brass-Stainless steel	Stainless steel Stainless steel
Model models	With ferrule	With ferrule	With ferrule
	With ring nut	With ring nut	With ring nut
	Without ferrule	Without ferrule	Without ferrule
	Without ring nut	Without ring nut	Without ring nut
	/	/	/
	/	/	/
	/	/	/
	/	/	/
	/	/	/
	/	/	/
Seal System Sealing Seats	NBR (Std) -10 / + 100 ° C	NBR (Std) -10 / + 100 ° C	NBR (Std) -10 / + 100 ° C
	EPDM -50 / + 150 ° C	EPDM -50 / + 150 ° C	EPDM -50 / + 150 ° C
	VITON -20 / +200 ° C	VITON -20 / +200 ° C	VITON -20 / +200 ° C
	SILICONE -60 / +200 ° C	SILICONE -60 / +200 ° C	SILICONE -60 / +200 ° C
	PTFE -196 / +250 ° C	PTFE -196 / +250 ° C	PTFE -196 / +250 ° C
	KALREZ -20 / +250 ° C	KALREZ -20 / +250 ° C	KALREZ -20 / +275 ° C
	/	Metal -196 / +250 ° C	Metal -196 / +450 ° C
Connection Inlet Connection	G.3 / 8 "- 1/2" ISO228	G.3 / 8 "- 1/2" ISO228	G.3 / 8 "- 1/2" ISO228
	G.1 / 2 "ISO228 F	G.1 / 2 "ISO228 F	G.1 / 2 "ISO228 F
	R.3 / 8 "- 1/2" EN10226	R.3 / 8 "- 1/2" EN10226	R.3 / 8 "- 1/2" EN10226
	3/8 "- 1/2" NPT	3/8 "- 1/2" NPT	3/8 "- 1/2" NPT
	DN15 PN16-40	3/4 "Tri Clamp	3/4 "Tri Clamp
	1/2 "150-300 lb	DN15 PN16-40-60	DN15 PN16-40-60
	/	1/2 "150-300 lb	1/2 "150-300 lb
	/	/	/
Output Connection Outlet Connection	G.3 / 4 "ISO228	G.3 / 4 "ISO228	G.3 / 4 "ISO228
	DN20 PN16-40-60	1 "- 1" 1/2 Tri Clamp	1 "- 1" 1/2 Tri Clamp
	/	DN20 PN16-40-60	DN20 PN16-40-60
	/	/	/
	/	/	/
	/	/	/
	/	/	/