Mts Sensor MT 551218 Positions Sensor
BRAND : Mts Sensor
Input
Measured variables: Displacement
Measuring range: 50 - 2500 mm in 5 mm steps
Output
Signal characteristic: Continuously analog output restricted by noise or A/D converter of control unit
Voltage: 0.25...4.75 VDC
0.5...4.5 VDC
Current: 4...20 mA
inverse: 4.75...0.25 VDC
inverse: 4.5...0.5 VDC
inverse: 20...4 mA
Resolution: typ ± 0.1 mm
Internal Cycle Time: 2 ms
Accuracy
Linearity: .1 mm
Hysteresis: ± 0.1 mm
Setpoint Tolerance: ? 1 mm
Operating conditions
Assembly orientation: In any direction
Operating temperature electronics, storage temp.: -40°C...+105°C
Fluid temperature: -30°C...+85°C
Dew point, humidity: 90 % rel. humidity, no condensation acc. EN60068-2-30
Pressure
Operating pressure ratings:
Pressure impulse test acc.
Ø 10 mm sensor rod
PN: 350 bar
Pmax: 450 bar DIN EN ISO 19879
IP rating sensor housing
Sensor housing: IP67, EN60529
Environmental testing:
Shock:
Vibration:
EMC:
IEC-68-2-27
100 g (6 ms) single hit
50 g (11 ms) at 1000 Shocks per axis
IEC 68-2-6 (10...2000 Hz)
Ø 10 mm sensor rod 15g (r.m.s)
ISO 14982 agricultural and forestry machines
ISO 11452-2 (radiated immunity) (Increased immunity voltage output 100V/m)
ISO 11452-4 (conducted immunity)
ISO 7637-1/2 (transient Impulses)
Materials and di...
Details
Input
Measured variables: Displacement
Measuring range: 50 - 2500 mm in 5 mm steps
Output
Signal characteristic: Continuously analog output restricted by noise or A/D converter of control unit
Voltage: 0.25...4.75 VDC
0.5...4.5 VDC
Current: 4...20 mA
inverse: 4.75...0.25 VDC
inverse: 4.5...0.5 VDC
inverse: 20...4 mA
Resolution: typ ± 0.1 mm
Internal Cycle Time: 2 ms
Accuracy
Linearity: .1 mm
Hysteresis: ± 0.1 mm
Setpoint Tolerance: ? 1 mm
Operating conditions
Assembly orientation: In any direction
Operating temperature electronics, storage temp.: -40°C...+105°C
Fluid temperature: -30°C...+85°C
Dew point, humidity: 90 % rel. humidity, no condensation acc. EN60068-2-30
Pressure
Operating pressure ratings:
Pressure impulse test acc.
Ø 10 mm sensor rod
PN: 350 bar
Pmax: 450 bar DIN EN ISO 19879
IP rating sensor housing
Sensor housing: IP67, EN60529
Environmental testing:
Shock:
Vibration:
EMC:
IEC-68-2-27
100 g (6 ms) single hit
50 g (11 ms) at 1000 Shocks per axis
IEC 68-2-6 (10...2000 Hz)
Ø 10 mm sensor rod 15g (r.m.s)
ISO 14982 agricultural and forestry machines
ISO 11452-2 (radiated immunity) (Increased immunity voltage output 100V/m)
ISO 11452-4 (conducted immunity)
ISO 7637-1/2 (transient Impulses)
Materials and dimensions
Sensor rod:
Housing:
Mechanical assembly:
Stainless steel 1.4306 / AISI 304L (Ø 10 mm)
Stainless steel 1.4305 / AISI 303
Flange housing Ø 48 mm
O-ring 40.87 x 3.53 mm NBR 80, backup ring 42.6 x 48 x 1.4 PTFE
Electrical installation
Connector:
Supply voltage:
Voltage supply ripple:
Power drain:
Electric strength:
Over voltage protection (GND - VDC):
Polarity protection (GND - VDC):
Load:
Connector System 2 x M12x1 with O-ring 7 x 1.35 mm NBR 70
Connecting flange brass nickel-plated with O-ring 13 x 1.6 NBR 70
12/24 VDC (tolerance range 8 - 32 VDC)
< 1 % PP
< 1 W
500 VDC (DC ground to machine ground)
+ 36 VDC
up to -36 VDC
RL
? 10 k? mA output
RL
? 250 ? (12 VDC) VDC output
RL
? 500 ? (24 VDC) VDC output
