What are you looking for?

Mts Sensor LD Position Sensor

BRAND : Mts Sensor

Measured Variables Displacement

Measuring Range 50 - 5000 mm

Output Voltage: 0...10 VDC or 10...0 VDC

(Minimum load: > 5 kOhm)

Current: 4(0)...20 mA or 20...4(0) mA

(Min/Max. 0 / 500 Ohm)

Start/Stop pulse: RS422 Differential signal

Adjustment of NULL and SPAN Analogue: 100% of measuring range (F.S.)

Resolution Analogue: Infinite, restricted by output ripple

Digital: 0,1 mm; 0,01 mm (controller depending)

Linearity < ± 0,02 % F.S. (Minimum ± 50 µm)

Repeatability < ± 0,001 % F.S.

Update Frequency Analogue: 1kHz / Digital: controller dependent

Connection Type Cable outlet

Input Voltage 24 VDC (-15 / +20 %)

Current Drain 100 mA typical

Ripple < 1 % peak to peak

Temperature Coefficient < 40 ppm/ ºC

Electric Strength 500 V (DC ground to machine ground)

Operating Temperature -40 ºC...+75 ºC

Dew Point, Humidity 90 % rel. humidity, no condensation

EMV-Test Electromagnetic emission EN 50081-2; Electromagnetic immunity EN 50082-2

EN 6100-4-2/3/4/6 Level 3/4 Criteria A,

LD-sensor installed in a ground metal housing

Shockrating 100 g, 6 ms / IEC-Standard 68-2-27

Vibration Rating 10 g, 10 - 2000 Hz / IEC-Standard 68-2-6

Mounting Any orientation

Magnet speed Any

Sensor rod + flange Stainless steel 1.4301 / AISI 304

- Pressure Rating 350 bar, 700 bar peak pressure

Sensor Electronic Housing Alum...

Details

Measured Variables Displacement

Measuring Range 50 - 5000 mm

Output Voltage: 0...10 VDC or 10...0 VDC

(Minimum load: > 5 kOhm)

Current: 4(0)...20 mA or 20...4(0) mA

(Min/Max. 0 / 500 Ohm)

Start/Stop pulse: RS422 Differential signal

Adjustment of NULL and SPAN Analogue: 100% of measuring range (F.S.)

Resolution Analogue: Infinite, restricted by output ripple

Digital: 0,1 mm; 0,01 mm (controller depending)

Linearity < ± 0,02 % F.S. (Minimum ± 50 µm)

Repeatability < ± 0,001 % F.S.

Update Frequency Analogue: 1kHz / Digital: controller dependent

Connection Type Cable outlet

Input Voltage 24 VDC (-15 / +20 %)

Current Drain 100 mA typical

Ripple < 1 % peak to peak

Temperature Coefficient < 40 ppm/ ºC

Electric Strength 500 V (DC ground to machine ground)

Operating Temperature -40 ºC...+75 ºC

Dew Point, Humidity 90 % rel. humidity, no condensation

EMV-Test Electromagnetic emission EN 50081-2; Electromagnetic immunity EN 50082-2

EN 6100-4-2/3/4/6 Level 3/4 Criteria A,

LD-sensor installed in a ground metal housing

Shockrating 100 g, 6 ms / IEC-Standard 68-2-27

Vibration Rating 10 g, 10 - 2000 Hz / IEC-Standard 68-2-6

Mounting Any orientation

Magnet speed Any

Sensor rod + flange Stainless steel 1.4301 / AISI 304

- Pressure Rating 350 bar, 700 bar peak pressure

Sensor Electronic Housing Aluminium diecasting housing

Sealing IP 65

Sensor Installation Fitting flange or thread M18 x 1,5

Magnet Type Ring magnet