Mts Sensor GBS GBS Position Sensor

Details

Output

Voltage 0…10 VDC and 10…0 VDC (min. load controller: > 5 k?)

Current 4(0)…20 mA or 20…4(0) mA (min./max. load: 0/500 ?)

Programming Programming of set points using optional accessories 2

Bluetooth® version 2.1

Measured value Position

Measurement parameters

Resolution 16 bit (minimum 1 µm depending on stroke length)

Cycle time Up to 1200 mm: 0.5 ms

Up to 2400 mm: 1.0 ms

> 2400 mm: 2.0 ms

Linearity typ. ? ±0.02 % F.S. (minimum ±60 µm)

Repeatability typ. ? ±0.005 % F.S. (minimum ±20 ?m)

Operating conditions

Operating temperature –40…+90 °C (–40…+194 °F), option –40…+100 °C (–40…+212 °F)

Ingress protection IP67 with proper mating connector

IP68 for cable outlet

Shock test 100 g (single shock) / IEC standard 60068-2-27

Vibration test 15 g / 10…2000 Hz, IEC standard 60068-2-6 (resonance frequencies excluded)

EMC test Electromagnetic emission according to EN 61000-6-4

Electromagnetic immunity according to EN 61000-6-2

The sensor meets the requirements of the EC directives and is marked with

Magnet movement velocity Any

Design/Material

Sensor electronics housing 3 Stainless steel 1.4305 (AISI 303), option: stainless steel 1.4404 (AISI 316L)

Sensor rod Stainless steel 1.4306; 1.4307 (AISI 304L), option: stainless steel 1.4404 (AISI 316L)

Stroke length 25…3250 mm (1…128 in.)

Operating pressure 350 bar, 700 bar peak (at 10 × 1 min)

Mechanical mounting

Mounting position Any

Mounting instruction Please consult the technical drawings and the operation manual

(document number: 551511)

Electrical connection

Connection type Cable outlet

5 pin M12 connector A-coded

6 pin M16 connector

Operating voltage +24 VDC (?15 / +20 %)

Ripple ? 0.28 Vpp

Current consumption 100 mA typically dependent on stroke length

Dielectric strength 500 VDC (DC ground to machine ground)

Polarity protection Up to ?30 VDC

Overvoltage protection Up to 36 VDC