Mts Sensor EP-O-0600M-D34-1-A01
BRAND : Mts Sensor
Input
Measured variable Position
Stroke length 50 - 2500 mm
Output
Interface CAN System ISO-DIS 11898
Data protocol CANopen: CIA Standard DS 301 V3.0 / Encoder Profile DS 406 V3.1
Baud rate, kBit/s 1000 800 500 250 125
Cable length, m < 25 < 50 < 100 < 250 < 500
The sensor will be supplied with ordered baud rate, which is changeable by customer
Accuracy
Resolution 10 µm, 20 µm
Velocity 1 mm / s
Linearity, deviation < ± 0.02 % F.S. (Minimum ± 60 µm)
Repeatability < ± 0.005 % F.S. (Minimum ± 10 µm)
Temperature coefficient < 15 ppm/ºC
Update frequency 1 ms
Operating Conditions
Magnet speed Any
Operating temperature -40° C ... +75° C
Dew point, humidity 90 % rel. humidity, no condensation
Ingress protection IP67 with proper mating connector
Shock test 100 g (single shock) IEC-Standard 60068-2-27
Vibration test 15 g / 10 - 2000 Hz IEC-Standard 60068-2-6 (resonance frequencies excluded)
EMC-Test Electromagnetic emission EN 61000-6-4 (for use in industrial environment)
Electromagnetic immunity EN 61000-6-2
The sensor meets the requirements of the EC directives and is marked with CE
Design / Material
Sensor enclosure Aluminum
Sensor housing Aluminum
Position magnet type Magnet slider hard ferrite, block magnet plastic
Installation
Mounting type Adjustable mounting clamps<...
Details
Input
Measured variable Position
Stroke length 50 - 2500 mm
Output
Interface CAN System ISO-DIS 11898
Data protocol CANopen: CIA Standard DS 301 V3.0 / Encoder Profile DS 406 V3.1
Baud rate, kBit/s 1000 800 500 250 125
Cable length, m < 25 < 50 < 100 < 250 < 500
The sensor will be supplied with ordered baud rate, which is changeable by customer
Accuracy
Resolution 10 µm, 20 µm
Velocity 1 mm / s
Linearity, deviation < ± 0.02 % F.S. (Minimum ± 60 µm)
Repeatability < ± 0.005 % F.S. (Minimum ± 10 µm)
Temperature coefficient < 15 ppm/ºC
Update frequency 1 ms
Operating Conditions
Magnet speed Any
Operating temperature -40° C ... +75° C
Dew point, humidity 90 % rel. humidity, no condensation
Ingress protection IP67 with proper mating connector
Shock test 100 g (single shock) IEC-Standard 60068-2-27
Vibration test 15 g / 10 - 2000 Hz IEC-Standard 60068-2-6 (resonance frequencies excluded)
EMC-Test Electromagnetic emission EN 61000-6-4 (for use in industrial environment)
Electromagnetic immunity EN 61000-6-2
The sensor meets the requirements of the EC directives and is marked with CE
Design / Material
Sensor enclosure Aluminum
Sensor housing Aluminum
Position magnet type Magnet slider hard ferrite, block magnet plastic
Installation
Mounting type Adjustable mounting clamps
Electrical connection
Connection type 5 pin connector M12
Supply voltage 24 VDC (+20 % / -15 %)
Current consumption max. 90 mA
Ripple < 0.288 Vpp
Dielectric strength 500 VDC (DC ground to machine ground)
Polarity protection > -30 VDC
Overvoltage protection < 36 VDC
