Italvibras MVSS 075/400-S08 602627 Electric Vibrator in Stainless Steel
BRAND : Italvibras
Power supply Three-phase voltage from 24V to 690V, 50Hz or
60Hz or single-phase 100-130V, 60Hz and 200-240V, 50Hz (single-phase types are
supplied without capacitor); suitable for use with an inverter from 20Hz to the
base frequency with constant torque load profile. Polarity 2, 4, 6 and 8 poles.
Conformity with Standards and Regulations MVSS - Low Voltage Directive
2006/95/EC; EN/IEC 60034-1; UL 1004-1, CSA C22.2 No.100, NEMA MG-1. MVSS-P -
Low Voltage Directive 2006/95/EC; ATEX Directive 2014/34/UE; EN/IEC 60034-1,
EN/IEC 60079-0, EN/IEC 60079-31, UL 1004- 1, CSA C22.2 No.100, NEMA MG-1.
Functioning Continual service (S1) at maximum declared centrifugal force and
electric power. Intermittent services are also possible depending on the type
of vibrator and the operating conditions. For detailed information, contact our
technical assistance office. Centrifugal force Range extended up to 4300 kgf.
(42.4 kN), with centrifugal force adjustable from 0 to 100%.
Mechanical protection IP 66 according to IEC/EN 60529. Insulation class Class F (155°C), class H (180°C) on request. Tropicalization Standard on all vibrators, with vacuum encapsulation up to size 35, with “drop by drop” trickle system for larger sizes. Ambient temperature From -20°C to +40°C. Versions for higher or lower temperatures are available on request. Vibrator thermal protection Standard PTC rated thermistor heat detectors 130°C on size 70...
Details
Power supply Three-phase voltage from 24V to 690V, 50Hz or
60Hz or single-phase 100-130V, 60Hz and 200-240V, 50Hz (single-phase types are
supplied without capacitor); suitable for use with an inverter from 20Hz to the
base frequency with constant torque load profile. Polarity 2, 4, 6 and 8 poles.
Conformity with Standards and Regulations MVSS - Low Voltage Directive
2006/95/EC; EN/IEC 60034-1; UL 1004-1, CSA C22.2 No.100, NEMA MG-1. MVSS-P -
Low Voltage Directive 2006/95/EC; ATEX Directive 2014/34/UE; EN/IEC 60034-1,
EN/IEC 60079-0, EN/IEC 60079-31, UL 1004- 1, CSA C22.2 No.100, NEMA MG-1.
Functioning Continual service (S1) at maximum declared centrifugal force and
electric power. Intermittent services are also possible depending on the type
of vibrator and the operating conditions. For detailed information, contact our
technical assistance office. Centrifugal force Range extended up to 4300 kgf.
(42.4 kN), with centrifugal force adjustable from 0 to 100%.
Mechanical protection IP 66 according to IEC/EN 60529.
Insulation class Class F (155°C), class H (180°C) on request. Tropicalization
Standard on all vibrators, with vacuum encapsulation up to size 35, with “drop
by drop” trickle system for larger sizes. Ambient temperature From -20°C to
+40°C. Versions for higher or lower temperatures are available on request.
Vibrator thermal protection Standard PTC rated thermistor heat detectors 130°C
on size 70, on request for smaller sizes. For MVSS-P series PTC 130°C are
standard for all types. On request, thermistors with different temperatures and
anti-condensation heaters. Fixing of the vibrator In all positions and
therefore without restriction. Lubrication All vibrators are lubricated in the
factory and do not require further lubrication at start-up.
Terminal box Large fixed electrical connections, with
terminal board cover in stainless steel AISI 304. Special shaped terminals
allow to fix the power supply cable, protecting it from loosening. Electric
motor Three-phase and single-phase asynchronous type. Designed for maximum
starting torques and torque curves specific to vibrating machines.
