Italvibras MVB 4500/15-FLC 601135 Electric Vibrator with Central Mounting Flange
BRAND : Italvibras
Power supply Three-phase voltage from 220V to 690V, 50Hz or
60Hz; suitable for use with an inverter from 20Hz to the base frequency with
constant torque load profile. Polarity 4 poles. Conformity with Standards and
Regulations Low Voltage Directive 2006/95/EC; ATEX Directive 2014/34/UE; EN/IEC
60034-1, EN/IEC 60079-0, EN/IEC 60079-31, UL 1004-1, CSA C22.2 No.100, NEMA
MG-1. Functioning Continual service (S1) at maximum declared centrifugal force
and electric power. Intermittent services are also possible depending on the
type of vibrator and the operating conditions. For detailed information,
contact our technical assistance office. Centrifugal force Range extended up to
7000 kgf. (68.7 kN), with centrifugal force adjustable from by varying weights
position. Mechanical protection IP 66 according to IEC/EN 60529.
Protection against mechanical impacts IK 08 according to IEC/EN 62262. Insulation class Class F (155°C), class H (180°C) on request. Tropicalization Standard on all vibrators with “drop by drop” trickle system. Ambient temperature From -20°C a +40°C. Versions for higher or lower temperatures are available on request. Vibrator thermal protection Standard PTC rated thermistor heat detectors 130°C from size 80, on request for smaller sizes. Also on request thermistors with different temperatures and anti-condensation heaters. Fixing of the vibrator Typically for vertical mounting, anyway possible...
Details
Power supply Three-phase voltage from 220V to 690V, 50Hz or
60Hz; suitable for use with an inverter from 20Hz to the base frequency with
constant torque load profile. Polarity 4 poles. Conformity with Standards and
Regulations Low Voltage Directive 2006/95/EC; ATEX Directive 2014/34/UE; EN/IEC
60034-1, EN/IEC 60079-0, EN/IEC 60079-31, UL 1004-1, CSA C22.2 No.100, NEMA
MG-1. Functioning Continual service (S1) at maximum declared centrifugal force
and electric power. Intermittent services are also possible depending on the
type of vibrator and the operating conditions. For detailed information,
contact our technical assistance office. Centrifugal force Range extended up to
7000 kgf. (68.7 kN), with centrifugal force adjustable from by varying weights
position. Mechanical protection IP 66 according to IEC/EN 60529.
Protection against mechanical impacts IK 08 according to
IEC/EN 62262. Insulation class Class F (155°C), class H (180°C) on request. Tropicalization
Standard on all vibrators with “drop by drop” trickle system. Ambient
temperature From -20°C a +40°C. Versions for higher or lower temperatures are
available on request. Vibrator thermal protection Standard PTC rated thermistor
heat detectors 130°C from size 80, on request for smaller sizes. Also on
request thermistors with different temperatures and anti-condensation heaters.
Fixing of the vibrator Typically for vertical mounting, anyway possible to
install in all positions and therefore without restriction. Lubrication All
vibrators are lubricated in the factory and do not require further lubrication
at start-up. Terminal box Large terminal box to facilitate electrical
connection. Special shaped terminals allow for the power supply cable to be
secured, whilst protecting it from loosening.
Electric motor Three-phase asynchronous type. Designed
for maximum starting torques and torque curves specific to requirements of
vibrating machines.
