What are you looking for?

Aryung ACFH-S29-50-50-TA Coolant filter system

BRAND : Aryung

ACFH, as a high pressure filtering system, suits for supplying high

pressure cutting oil to CNC or automatic lathes.

The way that the Element filters are installed is the suction technology. Since the filtered sludge gets discharged to the suction tank drain and then gets caught in the basket at the Duty Tank, it is very easy to dispose the filtered sludge.

The Element Filter applied to this system is designed to be cleaned just by supplying air depending on the cleaning cycle, so it lasts longer, and is easy for a user to replace it with a new one and take less maintenance cost.

ACFH series, filters being integrated in the coolant pumps, depends less on the size of the installation space with its compact cabinet type design.

Benefits of using ACFH

ACFH improves the speed of processing structural steels or any rigid materials. By discharging after cutting chips up, ACFH makes high speed processing possible and improves surface coefficient.

It is recommended for oils with high viscosity, between 10 and 32cSt, such as oil based cutting oils.

Pump division: AJ-290

Pressure: 50 bar

Filter Size: 50 ?...

Details

ACFH, as a high pressure filtering system, suits for supplying high

pressure cutting oil to CNC or automatic lathes.

The way that the Element filters are installed is the suction technology. Since the filtered sludge gets discharged to the suction tank drain and then gets caught in the basket at the Duty Tank, it is very easy to dispose the filtered sludge.

The Element Filter applied to this system is designed to be cleaned just by supplying air depending on the cleaning cycle, so it lasts longer, and is easy for a user to replace it with a new one and take less maintenance cost.

ACFH series, filters being integrated in the coolant pumps, depends less on the size of the installation space with its compact cabinet type design.

Benefits of using ACFH

ACFH improves the speed of processing structural steels or any rigid materials. By discharging after cutting chips up, ACFH makes high speed processing possible and improves surface coefficient.

It is recommended for oils with high viscosity, between 10 and 32cSt, such as oil based cutting oils.

Pump division: AJ-290

Pressure: 50 bar

Filter Size: 50 ?m

T : Cabinet type(Clean tank - Built)

A : Auto type

 

Type

High Pre’ pump

Motor

Built-in

Pump

Discharge

volume

l/min

Max’ Pressure

MPa/bar

Motor

Out-put

kw

Frequency

Hz

Voltage

V

Current

A

ACFH-30

26

3/30

3.0

50

200/380

10.1/5.8

AJ-250

 

AJ-290

32

60

220/380

11.0/6.4

40

50

200/380

10.1/5.8

50

60

220/380

11.0/6.4

ACFH-50

23

5/50

4.0

50

200/380

14.2/8.2

AJ-250

 

AJ-290

28

60

220/380

15.4/8.9

40

50

200/380

14.2/8.2

50

60

220/380

15.4/8.9

ACFH-70

20

7/70

5.5

50

200/380

20.0/11.5

AJ-250

25

60

220/380

23.1/13.4

ACFH-120

12

12/120

5.5

50

200/380

20.0/11.5

AJ-***

12

60

220/380

23.1/13.4